User manual

Phantom Camera Control Application - Help 113

NOTE

All the optional lines, if selected, will be displayed above the cine.

ii.

Inside Image:

Time Stamp - Where each image is tagged with the absolute date and time the image

was recorded. Enabling this option will display the time stamp information when the file

is played back.

From Trigger - When this option is selected the exact time the image was recorded

from the time the trigger input was detected will be displayed.

Draw Signals - When available the user can define which analog signal sample

information will be displayed in the corners of each image, up to four signals, (only

available if the cine file was captured using an attached Data Acquisition Unit and SAM-

3 for signal Acquisitions).

Samples per Stamp - Used to display the acquired selected signal samples on each

image . The Samples per Stamp value is the number of samples to be displayed in the

small corner windows representing the acquired signal. Its minimum value should be

the value of "Samples per image" defined in Live Panel>Advanced Settings>Signals.

NOTE

The information displayed inside the image cannot be removed.

Specify the Lossy Compression Quality. (This option is only available when saving as a Cine

JPEG, LEAD, LEAD JFIF, LEAD JTIF, JPEG, or JTIF file type.)

Define the Multihead Options... (Phantom v6 Series camera models only.)

Click the Multi-Head Options button:

When saving cine files from a Phantom v6 camera the system will, by default, save the

images from all four imaging heads into a single cine file. To save a unique cine file for

each of the Phantom v6 imaging heads:

Select the camera Head or Heads to save in the Multihead Options dialogue window,

then

ii.

Click the OK button.

Click the Save button to save the cine file.