User manual

Phantom Help File108

Save All RAM Cines to File

The Save All RAM to File command is used to save all cine image data recorded in a

cameras' DRAM to a user specified location, (for example, your system's hard drive, a

networked drive or to some peripheral drive such as a floppy drive, Zip drive, or tape drive).

This feature is extremely useful when the MultiCine feature has been implemented in the

camera as it will save all memory segments, with image data stored into it, to the specified

location.

The Phantom Camera Control application will save the cine files from each of the memory

segments, of the selected camera, with a user specified file name along with an appended

extension (Cine#) for each of the cine files.

Save All Flash Cines to File

The Save All Flash to File command is used to save all cine files stored in the non-volatile

Flash memory or an attached Phantom CineMag, of the selected camera. The files are

saved with a user specified file name along with an appended extension,

(camera_name_FlashCine#.ext), to a user specified location, (for example, your system's

hard drive, a networked drive or to some peripheral drive such as a floppy drive, Zip drive, or

tape drive).

Save RAM Cine to Flash

Non-volatile Flash Memory is an optionally installed solid-state flash storage module located

in a Phantom camera. This feature helps protect data loss caused by a power interruption to

the camera after recording one or more cine files.

The Save RAM Cine to Flash command is used to save image data recorded in a cameras'

DRAM to the Phantom cameras' optionally installed integrated non-volatile Flash memory or

in the CineMag.

Select&Save Cines to File

The Select&Save Cines to File feature allows the end-user to specify specific cines, or

MultiCine memory segments, or cines stored in Flash/CineMag memory, from one or more

attached Phantom cameras to save.