User manual

Phantom Help File106
© 2010 Vision Research - An AMETEK Company
Saved Range
Saved Range indicates the first and last image number of the images contained within the
edited cine file.
Recorded Range
Recorded Range indicates the first and last image number of all the images recorded.
Color
Color indicates if the cine was captured using a color sensor (Yes) or a monochrome sensor
(No).
Signals
Signals indicate if any external analog or binary signal measurements have been tagged to
the recorded images via the SAM-3 (Signal Acquisition Module-3) unit.
Image Time
Image Time indicates if the image timing information, for the active cine file, is available or
not.
Image Exposure
Image Exposure indicates if the image exposure information, for the active cine file, is
available or not.
Camera Version
Camera Version specifies the camera version code used to capture the cine file.
Serial
Serial specifies the serial number of the camera used to capture the cine file.
Resolution
Resolution displays the width x height of images saved in a file. The images may contain a
border so the Resolution may be greater than Acq Resolution.
Acq Resolution
Displays the width x height of images saved in a file. The images may contain a border so
the Resolution may be greater than Acq Resolution.
Post Trigger
Post Trigger indicates the number of Post Trigger frames captured during the recording
process.
Bits per pixel
Bits per pixel displays the active pixel's bit depth of the recorded images.
Sample Rate (fps)
Sample Rate displays what the Sample Rate, or frame rate, was set to record at.
Real
Real indicates the actual frame rate the images were recorded at.
Period
Period indicates the time necessary to record each of the images.
Exposure (µs)
Exposure displays the Exposure setting at the time the images were recorded.
EDR (µs)