User manual

PHANTOM 2 VISION Product Release Notes

f) When the yellow flashing disappears, the firmware has been updated. After a successful update, the

“firmware.bin” file’s name will change to “firmware.bin.bak00”. This file on the card can now be

deleted.

Special Notes:

a) During the update, do not turn off the camera or take out the Micro-SD card. This may prevent your

camera from switching on and will need a factory reset.

b) A fast red flashing LED on the camera after the update means the update has failed. Please try again.

c) You need to use the latest DJI Vision App (iOS App: v1.0.32; Android App: v1.0.38).

Firmware Updates on Dec 27

Overviews:

a) Phantom 2 Vision Assistant Software v1.08 released with support for Mac OS X 10.6(Lion) or above.

Assistant Software usages on Mac and Windows are exactly the same.

Special Notes:

a) When launching for the first time on Mac OS X, please open the Phantom 2 Vision Assistant Software in

the Finder. After the first successful launch, the application can be launched by double-clicking the

Phantom 2Visionicon in the Finder or using Launchpad.

b) Please download the application installer in DMG format from the download page of Phantom 2 Vision

on the DJI website.

c) The Assistant Software for Windows and Mac OS X will updated simultaneously in the future.

Firmware Updates on Dec 19

Overviews:

a) The Phantom 2 Vision Autopilot's firmware has been upgraded to v1.08.

b) The Central Board firmware has been upgraded to v1.0.1.19.

c) Phantom 2 Vision and PHANTOM 2 will share the PHANTOM 2 Assistant Software, which has been

upgraded to v1.08.

d) The User Guide has been updated to v1.08.

Major New Features:

a) In a Failsafe situation, if less than 6 GPS satellites are found for more than 20 seconds, the aircraft will

descend automatically.

b) The latest version of Central Board firmware optimizes the calculation method of battery life.