User manual

PHANTOM 2 VISION Product Release Notes

Firmware Updates on Feb 20

Overviews:

a) Phantom RC Assistant Software v1.1 released with support for Mac OS X 10.6 or above. Assistant

Software usages on Mac and Windows are exactly the same. Phantom RC v1.1 has been optimized, no

new function added.

Special Notes:

a) When launching for the first time on Mac OS X, please open the Phantom RC Assistant Software in the

Finder. After the first successful launch, the application can be launched by double-clicking the Phantom

RC icon in the Finder or using Launchpad.

b) Please download the application installer in DMG format from the download page of Phantom 2 Vision

on the DJI website.

c) The Assistant Software for Windows and Mac OS X will updated simultaneously in the future.

Firmware Updates on Jan 20

Overviews:

a) The DJI Vision has been updated and now can be downloaded. (iOS App: v1.0.32; Android App: v1.0.38)

b) The firmware of Phantom 2 Vision’s camera FC200 has been updated to v1.1.9. Please download it

through our website.

Major New Features:

Thank you for your patience! The latest camera firmware v1.1.9 now supports Adobe DNG RAW format

capturing. It also records the GPS location and relative altitude in the metadata of the Adobe DNG RAW

file. DJI will keep working hard on improving the quality of the RAW file and providing the best aerial

photography solution to our customers. Thank you for your constant support!

Update Procedures:

Follow the below instructions to update your firmware.

a) Download the latest camera firmware and unzip it.

b) Get a clean Micro-SD card (less than or equals to 32GB), and copy the “firmware.bin” file to the root

folder of the Micro-SD card.

c) Make sure the camera is turned off, and insert the Micro-SD card into the camera before turning it on.

d) Turn on the camera.

e) The firmware update will begin automatically. A yellow flashing LED on the camera indicates that the

camera is updating.