User manual

PHANTOM 2 VISION Product Release Notes

Special Notes:

a) Be sure to upgrade the flight controller and central board firmware to the latest version using Assistant

Software v1.08.

Firmware Updates on Dec 4

Overviews:

a) The latest version of the DJI Vision App (iOS App: v1.0.30; Android App: v1.0.34) is available on the App

Store and Google Play. Or you can get it from http://m.dji.net/djivision.

b) The latest version of the Phantom 2 Vision Camera, FC200, is v1.1.8.

Major New Features:

a) PAL support has been added to the camera including1080p25 and 960p25.

Update Procedures:

Follow the below instructions to update your firmware.

a) Copy the “firmware.bin” file to the root folder of your Micro-SD card.

b) Make sure the camera is turned off, and insert the Micro-SD card into the camera before turning it on.

c) Turn on the camera.

d) The firmware update will begin automatically. A yellow flashing LED on the camera indicates that the

camera is updating.

e) When the yellow flashing disappears, the firmware has been updated. After a successful update, the

“firmware.bin” file’s name will change to “firmware.bin.bak00”. This file can now be deleted.

Special Notes:

a) During the update, do not turn off the camera or take out the Micro-SD card. This may prevent your

camera from switching on and will need a factory reset.

b) A fast red flashing LED on the camera after the update means the update has failed. Please try again.

Firmware Updates on Nov 25

Overviews:

a) The latest version of the DJI Vision App (iOS App: v1.0.29; Android App: v1.0.33) has passed both iOS

App Store and Google Play reviews. Please go to the App Store, Google Play or visit

http://m.dji.net/djivisionto download the latest version.

b) Adobe has released a lens profile for the DJI Phantom 2 Vision camera to remove its lens distortion.