User's Manual

Introduction
Thanks for choosing the Vision’s wireless Motion sensor of the home security device. This
sensor is a Z-Wave
TM
enabled device (interoperable, two-way RF mesh networking
technology) and is fully compatible with any Z-Wave
TM
enabled network and it’s security
framework. Every mains powered Z-Wave
TM
enabled device acts as a signal repeater and
multiple devices result in more possible transmission routes which helps eliminate “RF
dead-spots”.
Z-Wave
TM
enabled device displaying the Z-Wave
TM
logo can also be used with it
regardless of the manufacturer, and ours can also be used in other manufacturer’s Z-Wave
TM
enabled networks. This sensor monitors movement, and send Z-Wave
TM
signal when
movement is detected inside the building. When the device is secure included into Z-Wave
network, above communication will be encrypted.
Product Description and Specification
*** For indoor use only ***
Specification: Package Content:
Protocol: Z-Wave™ (ZM5202)
Frequency Range:
865.22MHz (ZP3112IN-5)
868.10MHz (ZP3112MY-5)
868.42MHz (ZP3112EU-5)
869.00MHz (ZP3112RU-5)
908.42MHz (ZP3112US-5)
916.00MHz (ZP3112IL-5)
919.80MHz (ZP3112HK-5)
920.00MHz~923.00MHz (ZP3112KR-5)
921.42MHz (ZP3112BR-5)
922.00MHz~926.00MHz (ZP3112JP-5)
Operating Range: Up to 100 feet line of sight
Operating Temp.: -10°C~ 40°C (5°F~104°F)
Battery: AAA x 2
1pc
1pc
2pc
1pc
ZP 3112 Motion sensor
Adhesive tape for sensor
AAA Alkaline Battery
Installation & Operation Manual
Z-Wave Command Classes:
COMMAND_CLASS_ASSOCIATION_GRP_INFO
COMMAND_CLASS_ASSOCIATION_V2
COMMAND_CLASS_BATTERY
COMMAND_CLASS_CONFIGURATION
COMMAND_CLASS_DEVICE_RESET_LOCALLY
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
COMMAND_CLASS_NOTIFICATION_V4
COMMAND_CLASS_POWERLEVEL
COMMAND_CLASS_SECURITY
COMMAND_CLASS_SENSOR_MULTILEVEL_V7
COMMAND_CLASS_VERSION_V2
COMMAND_CLASS_WAKE_UP_V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
- 2 - - 1 -
(A) – Wall Corner
(C) - Ceiling
(D) – Vertical
(E) - Angled
(B) – Table