Installation & Operation Manual ZD2102IN-5 ZD2102MY-5 ZD2102EU-5 ZD2102RU-5 ZD2102US-5 ZD2102IL-5 ZD2102KR-5 ZD2102HK-5 ZD2102JP-5 ZD2102BR-5 Wireless Door/ Window Sensor ZD 2102-5 V1 1031114 6B1Z-21002
Operation 1. Opening/Closing the door/window to separate the magnet from the sensor will send signal to any association nodes accordding to the Status/Signal table on page 1 and the LED will flash once. 2. Normal operation, the LED will not light. 3. If the cover of sensor is removed, the tamper switch will send signal according the Status/Signal table, and the LED will go solid and ZD2102 will send “Wake Up Notification” after 10 seconds.
11. Battery Capacity Detection: * Use “Battery Get” command to have the battery capacity back in % * It will detect the battery capacity automatically * Low Battery Auto Report (low battery is set as 2.6+/-0.1 Voltage, detects every 2 hours) 12. Association: * Support one group with 5 nodes * All triggering reports & low voltage report will be sent to the associated nodes 13.
LED Status for Z-Wave Network: Notification V4 Type * After power on, the red LED will flash if the ZD2102 has not been included yet.
