Operating Instruction

SUPMOGO
Simple Instruction
Page 5 of 7 24-Sep-20 Ver1.0
 Massage intensity can only be set in Working state (on) , as shown in Figure.
Description of keys
[SW-PB] Key.
Press and hold for 1.5 seconds to turn on/off the power.
Indicator status description
 Charging complete: green light always on; normal charging: red light breathing;
charging fault: red light flashing fast.
 Low battery: red light blinks slowly.
 Bluetooth not connected: blue light blinks slowly.
 Working status: green light always on; not working status: green light flashing slowly.
 Indicator priority: charging complete/normal charging/charging fault>low
battery>Bluetooth not connected>working status/not working status.
Charging instructions
 Using Type-c interface charging, charging complete: green light always on; normal
charging: red light breathing; charging failure: red light flashing.
 Charging in the power-on state, the device will turn off, charging in the off state is still
Increase 1min
Decrease 1min
Increase 1Hz
Decrease 1Hz