Datasheet

ZSC
www.vishay.com
Vishay
Revision: 10-Jan-13
2
Document Number: 28006
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ADDITIONAL ELECTRICAL DATA
Notes
•Where, C = Rated capacitance in μF
• V = Rated DC working voltage in V
Note
• When the capacitance exceeds 1000 μF, 0.002 shall be added every 1000 μF increase.
Notes
(1)
The specifications shall be satisfied when the capacitors are restored to 20 °C after the rated voltage applied for 2000 h to 5000 h at 105 °C.
(2)
The above specifications shall be satisfied when the capacitors are restored to 20 °C after exposing them for 1000 h at 105 °C without
voltage applied.
LEAKAGE CURRENT (Test conditions: U
R
, 20 °C)
RATED VOLTAGE TIME CASE SIZE VALUE
6.3 V to 100 V after 2 min Ø 4 mm to Ø 18 mm
I = 0.01 CV or 3 μA,
whichever is greater
DISSIPATION FACTOR (tan at 120 Hz, 20 °C)
RATED VOLTAGE 6.3 10 16 25 35 50 63 80 100
tan  (max.) 0.30 0.26 0.22 0.16 0.13 0.10 0.08 0.08 0.07
LOW TEMPERATURE BEHAVIOR (at 120 Hz)
IMPEDANCE RATIO
RATED VOLTAGE
6.310162535506380100
432222222
854333333
MULTIPLIER OF RIPPLE CURRENT AS A FUNCTION OF FREQUENCY
FREQUENCY
(Hz)
CAPACITANCE
(μF)
50, 60 0.60
120 0.70
1000 0.85
10 000 and up 1.0
TEST PROCEDURES AND REQUIREMENTS
TEST TEST TIME CAPACITANCE CHANGE DISSIPATION FACTOR LEAKAGE CURRENT
Endurance
(1)
2000 h
Within ± 30 % of initial value
for Ø  D 6.3 mm and Ø 10 x 7.7 L
Less than 300 % of specified value
Within specified value
5000 h
Within ± 30 % of initial value
for Ø  D 8 mm
Shelf life
(2)
1000 h Within ± 30 % of initial value Less than 300 % of specified value
Z
- 25 °C
Z
+ 20 °C
-----------------------
Z
- 55 °C
Z
+ 20 °C
-----------------------