Datasheet

WSBS5216
www.vishay.com
Vishay Dale
Revision: 15-May-2018
2
Document Number: 30383
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS in inches (millimeters)
DERATING
0.094 (2.4) Ref.
0.281 (7.5) Ref.
0.118 ± 0.002 (3.0 ± 0.5)
1.327 ± 0.008 (33.7 ± 0.15)
0.118 ± 0.008 (3 ± 0.15) x 45°
Calibration notch
0.00 to 0.160 deep
0.078 (2.0) R
Calibration notch
2.047 ± 0.012 (52.0 ± 0.3)
0.630 ± 0.008
(16.0 ± 0.15)
Ø 0.260 ± 0.006 (Ø 6.6 ± 0.1) (2)
0.0394 ± 0.008 (1 ± 0.15) x 45° (3)
70
120
100
80
60
40
20
0
1751501251007550250- 25- 50- 65
Ambient Temperature in °C
Rated Power in %
TOLERANCES ON DECIMALS
XXX ± 0.005
UNLESS OTHERWISE LISTED
RESISTANCE
VALUE (μ)
ELEMENT
MATERIAL
100 Mn-Cu
PERFORMANCE
TEST CONDITIONS OF TEST TEST LIMITS
Thermal shock -55 °C to +150 °C, 1000 cycles, 15 min at each extreme ± 0.5 % R
Short time overload 10x rated power for 5 s ± 0.5 % R
Low temperature storage -65 °C for 24 h ± 0.5 % R
High temperature exposure 1000 h at +170 °C ± 1.0 % R
Bias humidity +85 °C, 85 % RH, 10 % bias, 1000 h ± 0.5 % R
Mechanical shock 100 g’s for 6 ms, 5 pulses ± 0.5 % R
Vibration Frequency varied 10 Hz to 2000 Hz in 1 min, 3 directions, 12 h ± 0.5 % R
Load life 1000 h at +70 °C, 1.5 h “ON”, 0.5 h “OFF” ± 1.0 % R
Moisture resistance MIL-STD-202, method 106, 0 % power, 7b not required ± 0.5 % R