Datasheet

VS-40EPF0.PbF Series, VS-40EPF0.-M3 Series
www.vishay.com
Vishay Semiconductors
Revision: 06-Feb-14
1
Document Number: 94102
For technical questions within your region: [e-mail]
, [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fast Soft Recovery Rectifier Diode, 40 A
FEATURES
• 150 °C max. operating junction temperature
• Low forward voltage drop and short reverse
recovery time
• Designed and qualified according to
JEDEC
®
-JESD47
• Material categorization: 
For definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
These devices are intended for use in output rectification
and freewheeling in inverters, choppers and converters as
well as in input rectification where severe restrictions on
conducted EMI should be met.
DESCRIPTION
The VS-40EPF0... fast soft recovery rectifier series has been
optimized for combined short reverse recovery time and low
forward voltage drop.
The glass passivation ensures stable reliable operation in
the most severe temperature and power cycling conditions.
PRODUCT SUMMARY
Package TO-247AC modified (2 pins)
I
F(AV)
40 A
V
R
200 V, 400 V, 600 V
V
F
at I
F
1.25 V
I
FSM
475 A
t
rr
60 ns
T
J
max. 150 °C
Diode variation Single die
Snap factor 0.5
Cathode
Base
cathode
Anode
1
3
2
1
2
3
TO-247AC modified
Available
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL CHARACTERISTICS VALUES UNITS
I
F(AV)
Sinusoidal waveform 40 A
V
RRM
200 to 600 V
I
FSM
475 A
V
F
10 A, T
J
= 25 °C 1 V
t
rr
1 A, - 100 A/μs 60 ns
T
J
-40 to 150 °C
VOLTAGE RATINGS
PART NUMBER
V
RRM
, MAXIMUM PEAK
REVERSE VOLTAGE
V
V
RSM
, MAXIMUM NON-REPETITIVE
PEAK REVERSE VOLTAGE
V
I
RRM
AT 150 °C
mA
VS-40EPF02PbF, VS-40EPF02-M3 200 300
8VS-40EPF04PbF, VS-40EPF04-M3 400 500
VS-40EPF06PbF, VS-40EPF06-M3 600 700
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average forward current I
F(AV)
T
C
= 105 °C, 180° conduction half sine wave 40
A
Maximum peak one cycle
non-repetitive surge current
I
FSM
10 ms sine pulse, rated V
RRM
applied 400
10 ms sine pulse, no voltage reapplied 475
Maximum I
2
t for fusing I
2
t
10 ms sine pulse, rated V
RRM
applied 800
A
2
s
10 ms sine pulse, no voltage reapplied 1131
Maximum I
2
t for fusing I
2
t t = 0.1 ms to 10 ms, no voltage reapplied 11 310 A
2
s