Datasheet

VS-16CTU04PbF, VS-16CTU04-N3
www.vishay.com
Vishay Semiconductors
Revision: 26-Jun-12
1
Document Number: 94008
For technical questions within your region: [e-mail]
, [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Ultrafast Rectifier, 16 A FRED Pt
®
FEATURES
• Ultrafast recovery time
• Low forward voltage drop
• 175 °C operating junction temperature
• Low leakage current
• Designed and qualified for industrial level
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
DESCRIPTION/APPLICATIONS
FRED Pt
®
series are the state of the art ultrafast recovery
rectifiers specifically designed with optimized performance
of forward voltage drop and ultrafast recovery time.
The planar structure and the platinum doped life time
control, guarantee the best overall performance,
ruggedness and reliability characteristics.
These devices are intended for use in the output
rectification stage of SMPS, UPS, DC/DC converters as
well as freewheeling diode in low voltage inverters and
chopper motor drives.
Their extremely optimized stored charge and low recovery
current minimize the switching losses and reduce over
dissipation in the switching element and snubbers.
PRODUCT SUMMARY
Package TO-220AB
I
F(AV)
2 x 8 A
V
R
400 V
V
F
at I
F
1.3 V
t
rr
typ. See Recovery table
T
J
max. 175 °C
Diode variation Common cathode
Anode
13
2
Base
common
cathode
2
Common
cathode
Anode
TO-220AB
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Peak repetitive reverse voltage V
RRM
400 V
Average rectified forward current
per leg
I
F(AV)
8
A
total device T
C
= 155 °C, rated V
R
16
Non-repetitive peak surge current I
FSM
T
C
= 25 °C 100
Peak repetitive forward current I
FRM
T
C
= 155 °C, rated V
R
, square wave, 20 kHz 16
Operating junction and storage temperatures T
J
, T
Stg
- 65 to 175 °C
ELECTRICAL SPECIFICATIONS PER LEG (T
J
= 25 °C unless otherwise specified)
PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNITS
Breakdown voltage,
blocking voltage
V
BR
,
V
R
I
R
= 100 μA 400 - -
V
Forward voltage V
F
I
F
= 8 A - 1.19 1.3
I
F
= 8 A, T
J
= 150 °C - 0.94 1.0
Reverse leakage current I
R
V
R
= V
R
rated - 0.2 10
μA
T
J
= 150 °C, V
R
= V
R
rated - 20 500
Junction capacitance C
T
V
R
= 400 V - 14 - pF
Series inductance L
S
Measured lead to lead 5 mm from package body - 8.0 - nH