Datasheet

VS-10ETF1...FPPbF Series, VS-10ETF1...FP-M3 Series
www.vishay.com
Vishay Semiconductors
Revision: 19-Dec-13
1
Document Number: 94093
For technical questions within your region: [e-mail]
, [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fast Soft Recovery Rectifier Diode, 10 A
FEATURES
• 150 °C max. operation junction temperature
• Designed and qualified according to
JEDEC
®
-JESD47
• Fully isolated package (V
INS
= 2500 V
RMS
)
• UL E78996 approved
• Material categorization: 
For definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
These devices are intended for use in output rectification
and freewheeling in inverters, choppers and converters as
well as in input rectification where severe restrictions on
conducted EMI should be met.
DESCRIPTION
The VS-10ETF1..FP... fast soft recovery rectifier series has
been optimized for combined short reverse recovery time
and low forward voltage drop. 
The glass passivation ensures stable reliable operation in
the most severe temperature and power cycling conditions.
PRODUCT SUMMARY
Package TO-220FP
I
F(AV)
10 A
V
R
1000 V, 1200 V
V
F
at I
F
1.33 V
I
FSM
140 A
t
rr
80 ns
T
J
max. 150 °C
Diode variation Single die
Snap factor 0.6
2
1
Cathode
3
Anode
TO-220 FULL-PAK
1
2
3
Available
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL CHARACTERISTICS VALUES UNITS
V
RRM
1000 to 1200 V
I
F(AV)
Sinusoidal waveform 10
A
I
FSM
140
t
rr
1 A, 100 A/µs 80 ns
V
F
10 A, T
J
= 25 °C 1.33 V
T
J
-40 to 150 °C
VOLTAGE RATINGS
PART NUMBER
V
RRM
, MAXIMUM PEAK
REVERSE VOLTAGE
V
V
RSM
, MAXIMUM NON-REPETITIVE
PEAK REVERSE VOLTAGE
V
I
RRM
AT 150 °C
mA
VS-10ETF10FPPbF, VS-10ETF10FP-M3 1000 1100
4
VS-10ETF12FPPbF, VS-10ETF12FP-M3 1200 1300
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average forward current I
F(AV)
T
C
= 95 °C, 180° conduction half sine wave 10
A
Maximum peak one cycle
non-repetitive surge current
I
FSM
10 ms sine pulse, rated V
RRM
applied 115
10 ms sine pulse, no voltage reapplied 140
Maximum I
2
t for fusing I
2
t
10 ms sine pulse, rated V
RRM
applied 66
A
2
s
10 ms sine pulse, no voltage reapplied 94
Maximum I
2
t for fusing I
2
t t = 0.1 to 10 ms, no voltage reapplied 940 A
2
s