Datasheet

ManualsBrandsVishay ManualsHigh Speed / Logic OptocouplersHigh Speed Optocoupler 250mW SMD-6 Phototransistor

VOH1016AB, VOH1016AD, VOH1016AG

www.vishay.com

Vishay Semiconductors

Rev. 1.2, 06-Mar-2019

Document Number: 84896

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

High Speed Optocoupler, 1 MBd, Schmitt Trigger

DESIGN SUPPORT TOOLS AVAILABLE

DESCRIPTION

The VOH1016A is a single channel 1 MBd optocoupler

utilizing a high efficient input LED coupled with an integrated

optical photodiode IC detector. The detector has an

open collector transistor output with Schmitt-Trigger

functionality. The low turn-on threshold and low supply

current together with a guaranteed common mode transient

immunity of 10 kV/μs makes the VOH1016A to a perfect

solution for galvanic noise isolation or to break up ground

loops in digital applications. The wide power supply range

up to 15 V enables isolated level shifting in applications

using different voltage domains.

FEATURES

• High data rate 2 MHz (NRZ)

• Latch up and oscillation free

• Low turn-on threshold current 2 mA

• Logic compatible output

• Guaranteed on / off threshold hysteresis

• Wide supply voltage range 3 V to 15 V

• Minimum common mode transient immunity (CMTI)

10 kV/μs

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Microprocessor system interface

• Ground loop elimination

• Galvanic noise isolation

• Serial bus systems

• Digital control power supply

• Signal level translation

• PLC, ATE input / output isolation

• Computer peripheral interface

AGENCY APPROVALS

• UL 1577

• cUL 1577

• DIN EN 60747-5-5 (VDE 0884-5) available with option “V”

Anode

Cathode

GND

23030

3D Models

Design Tools

Documents

Models

ORDERING INFORMATION

VOH1 0 1 6A # - V T#

PART NUMBER PACKAGE

OPTION

VDE

OPTION

TAPE

AND

REEL

AGENCY CERTIFIED / PACKAGE CMTI (kV/μs)

UL, cUL 10

DIP-6 VOH1016AD

DIP-6, 400 mil VOH1016AG

SMD-6 VOH1016AB-T

SMD-6, 180° oriented VOH1016AB-T2

VDE, UL, cUL 10

DIP-6 VOH1016AD-V

DIP-6, 400 mil VOH1016AG-V

SMD-6 VOH1016AB-VT

SMD-6, 180° oriented VOH1016AB-VT2

Summary of content (12 pages)

PAGE 1
VOH1016AB, VOH1016AD, VOH1016AG www.vishay.com Vishay Semiconductors High Speed Optocoupler, 1 MBd, Schmitt Trigger FEATURES Anode 1 • • • • • • • High data rate 2 MHz (NRZ) Latch up and oscillation free Low turn-on threshold current 2 mA Logic compatible output Guaranteed on / off threshold hysteresis Wide supply voltage range 3 V to 15 V Minimum common mode transient immunity (CMTI) 10 kV/μs • Material categorization: for definitions of compliance please see www.vishay.
PAGE 2
VOH1016AB, VOH1016AD, VOH1016AG www.vishay.
PAGE 3
VOH1016AB, VOH1016AD, VOH1016AG www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. - 1.1 1.4 0.7 1.0 - UNIT INPUT IF = 4 mA Forward voltage VF IF = 0.3 mA Reverse current V VR = 3 V IR - - 10 μA f = 1 MHz, VF = 0 V CIN - 30 250 pF VCC 3 - 15 V High level supply current IF = 0 mA, VCC = 5 V ICCH - 0.55 1.
PAGE 4
VOH1016AB, VOH1016AD, VOH1016AG www.vishay.com Vishay Semiconductors COMMON MODE TRANSIENT IMMUNITY (Tamb = 25 °C, unless otherwise specified) PARAMETER Common mode transient immunity TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT RL = 270 Ω, VCC = 5 V, VCM = 1000 V, IF = 0 mA |CMH| 10 - - kV/μs RL = 270 Ω, VCC = 5 V, VCM = 1000 V, IF = IF(on) (max.) |CML| 10 - - kV/μs 5V VCM (peak) IF Switch B 1 6 2 5 3 4 RL dV VCM = Δt dt 270 Ω VO 0V Δt 0.
PAGE 5
VOH1016AB, VOH1016AD, VOH1016AG www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Axis Title Axis Title 100 100 10000 10000 Tamb = -40 °C 100 Tamb = 25 °C 1000 1st line 2nd line 10 2nd line IO - Output Current (mA) 1000 1st line 2nd line 10 100 Tamb = 100 °C 10 1 0.8 1.0 1.2 1.4 1.6 10 1 0.01 1.8 0.1 VF - Forward Voltage (V) VO - Output Voltage (V) Fig. 5 - Forward Current vs. Forward Voltage Fig. 8 - Output Current vs.
PAGE 6
VOH1016AB, VOH1016AD, VOH1016AG www.vishay.com Vishay Semiconductors Axis Title 10000 VCC = 5 V IF = 4 mA 0.8 1000 0.6 1st line 2nd line 2nd line tp - Propagation Delay Time (μs) 1.0 0.4 tPLH 0.2 100 tPHL 10 0 0.1 1 10 RL - Load Resistance (kΩ) Fig. 11 - Propagation Delay Time vs. Load Resistance Axis Title 10000 1.6 1000 1.2 Tamb = 100 °C 1st line 2nd line 2nd line ICCH - High Level Supply Current (mA) 2.0 Tamb = 25 °C 0.8 100 0.
PAGE 7
VOH1016AB, VOH1016AD, VOH1016AG www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS (in millimeters) DIP-6 6.5 ± 0.5 (0.256) 7.62 ± 0.3 (0.3) 7.3 ± 0.5 (0.287) 3.5 ± 0.5 (0.138) 0.5 typ. (0.02) 3.3 ± 0.5 (0.13) 2.8 ± 0.5 (0.110) 2.54 ± 0.25 (0.1) 0.26 (0.010) 0.5 ± 0.1 (0.02) 7.62 to 9.98 23070 Fig. 1 DIP-6, 400 mil 6.5 ± 0.5 (0.256) 7.62 ± 0.3 (0.3) 7.3 ± 0.5 (0.287) 3.5 ± 0.5 (0.138) 6.9 ± 0.5 (0.272) 2.8 ± 0.5 (0.110) 23071 2.3 ± 0.5 (0.09) 2.54 ± 0.25 (0.1) 0.26 (0.010) 10.
PAGE 8
VOH1016AB, VOH1016AD, VOH1016AG www.vishay.com Vishay Semiconductors SMD-6 6.5 ± 0.5 (0.256) 7.62 ± 0.3 (0.3) 7.3 ± 0.5 (0.287) 3.5 ± 0.5 (0.138) 0.26 (0.010) 0.35 ± 0.25 (0.014) 1.2 ± 0.1 (0.047) 1.0 ± 0.25 (0.039) 2.54 ± 0.25 (0.1) 10.16 ± 0.3 (0.4) 23072 Fig. 3 PACKAGE MARKING VOH1016A V YWW 28 Fig.
PAGE 9
VOH1016AB, VOH1016AD, VOH1016AG www.vishay.com Vishay Semiconductors PACKING INFORMATION (in millimeters) DEVICES PER TUBES TYPE UNITS/TUBE TUBES/BOX DIP-6 50 40 UNITS/BOX 2000 DIP-6, 400 mil 50 40 2000 Tape SMD-6 4 ± 0.1 1.75 ± 0.1 12 ± 0.1 16 ± 0.3 2 ± 0.1 7.5 ± 0.1 Ø 1.55 ± 0.05 0.3 ± 0.05 23073 Fig. 15 - Tape and Reel Packaging (1000 pieces on reel) Tape SMD-6, 180° orientation 4 ± 0.1 1.75 ± 0.1 12 ± 0.1 16 ± 0.3 2 ± 0.1 7.5 ± 0.1 Ø 1.55 ± 0.05 0.3 ± 0.05 23074 Fig.
PAGE 10
VOH1016AB, VOH1016AD, VOH1016AG www.vishay.com Vishay Semiconductors Reel + 0.2 -0 + 0.5 - 0.2 13 2.0 ±0 .5 100.0 ± 0.3 330.0 ± 2 21 ± 0.8 1.8 23012 16.4 +1 -0 Fig. 17 - Tape and Reel Shipping Medium SOLDER PROFILES IR Reflow Soldering (JEDEC® J-STD-020C compliant) Axis20 Title s One time soldering reflow is recommended within the condition of temperature and time profile shown below. Do not solder more than three times. Preheat - Temperature minimum (TS min.
PAGE 11
VOH1016AB, VOH1016AD, VOH1016AG www.vishay.com Vishay Semiconductors Wave Soldering (JEDEC JESD22-A111 compliant) Hand Soldering by Soldering Iron One time soldering is recommended within the condition of temperature. Allow single lead soldering in every single process. One time soldering is recommended. Temperature: 260 °C + 0 °C / - 5 °C Temperature: 380 °C + 0 °C / - 5 °C Time: 10 s Time: 3 s max.
PAGE 12
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.