Datasheet

VLMO30.., VLMS30.., VLMY30..
www.vishay.com
Vishay Semiconductors
Rev. 1.6, 03-Nov-15
3
Document Number: 81322
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1)
In one packing unit I
Vmax.
/I
Vmin.
≤ 1.6
Note
(1)
In one packing unit I
Vmax.
/I
Vmin.
≤ 1.6
Note
• Luminous Intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order
grous which include only a few brightness groups. Only one group will be shipped in one reel (there will be no mixing of two groups on each
reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups
are measured and binned, single wavelength groups will be shipped in any one reel. In order to ensure availability, single wavelength groups
will not be orderable.
OPTICAL AND ELECTRICAL CHARACTERISTICS (T
amb
= 25 °C, unless otherwise specified)
VLMY30.., ORANGE
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity
(1)
I
F
= 2 mA VLMO3000 I
V
5.6 16 - mcd
I
F
= 2 mA VLMO30K1L2 I
V
7.1 15 18 mcd
I
F
= 2 mA VLMO30L1M2 I
V
11.2 16.5 28 mcd
I
F
= 2 mA VLMO30K1M2 I
V
7.1 16 28 mcd
Dominant wavelength I
F
= 2 mA λ
d
600 605 609 nm
Peak wavelength I
F
= 2 mA λ
p
- 610 - nm
Angle of half intensity I
F
= 2 mA ϕ -± 60- deg
Forward voltage I
F
= 2 mA V
F
-1.82.2V
Reverse voltage I
R
= 10 μA V
R
615- V
OPTICAL AND ELECTRICAL CHARACTERISTICS (T
amb
= 25 °C, unless otherwise specified)
VLMY30.., YELLOW
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity
(1)
I
F
= 2 mA VLMY3000 I
V
4.5 11.6 - mcd
I
F
= 2 mA VLMY3001 I
V
7.1 11.8 18 mcd
I
F
= 2 mA VLMY30J2L1 I
V
5.6 10.6 14 mcd
I
F
= 2 mA VLMY30K2M1 I
V
9 12.3 22.4 mcd
I
F
= 2 mA VLMY30J2M1 I
V
5.6 11.6 22.4 mcd
Dominant wavelength I
F
= 2 mA λ
d
581 587 594 nm
Peak wavelength I
F
= 2 mA λ
p
- 585 - nm
Angle of half intensity I
F
= 2 mA ϕ -± 60- deg
Forward voltage I
F
= 2 mA V
F
-1.82.2V
Reverse voltage I
R
= 10 μA V
R
615- V
LUMINOUS ITENSITY CLASSIFICATION
GROUP
STANDARD
LIGHT INTENSITY (mcd)
OPTIONAL MIN. MAX.
H
1 2.8 3.55
2 3.55 4.5
J
14.55.6
25.67.1
K
17.19.0
2 9.0 11.2
L
1 11.2 14.0
2 14.0 18.0
M
1 18.0 22.4
2 22.4 28.0