Datasheet

ManualsBrandsVishay ManualsLEDsSMD LED Flat 5500K White 450mcd PLCC-2

VLMW41..

www.vishay.com

Vishay Semiconductors

Rev. 1.8, 03-Aug-15

Document Number: 81370

For technical questions, contact: LED@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Standard SMD LED PLCC-2

DESCRIPTION

This device has been designed to meet the increasing

demand for white SMD LED.

The package of the VLMW41.. is the PLCC-2.

It consists of a lead frame which is embedded in a white

thermoplast. The reflector inside this package is filled with a

mixture of epoxy and TAG phosphor.

The TAG phosphor converts the blue emission partially to

yellow, which mixes with the remaining blue to give white.

PRODUCT GROUP AND PACKAGE DATA

• Product group: LED

• Package: SMD PLCC-2

• Product series: standard

• Angle of half intensity: ± 60°

FEATURES

• High efficient InGaN technology

• Chromaticity coordinate categorized

according to CIE1931 per packing unit

• Typical color temperature 5500 K

• EIA and ICE standard package

• Compatible with reflow, vapor phase

and wave solder processes according to

CECC 00802 and J-STD-020

• Available in 8 mm tape reel

• Preconditioning according to JEDEC

level 2a

• ESD-withstand voltage: up to 2 kV according to

JESD22-A114-B

• AEC-Q101 qualified

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Camera flash light

• Signal and symbol luminaire

•Marker lights

• Interior and exterior automotive lighting: brake lights, turn

lights, backlighting, side markers

• Indicator lighting

19225

PARTS TABLE

PART COLOR

LUMINOUS INTENSITY

(mcd)

at I

(mA)

COORDINATE

(x, y)

at I

(mA)

FORWARD VOLTAGE

(V)

at I

(mA)

TECHNOLOGY

MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.

VLMW41S1T1-5K8L-08 White 180 275 355 10 -

0.33,

0.33

-10 - 3.34.210

InGaN / TAG

on sapphire

VLMW41S1T1-5K8L-18 White 180 275 355 10 -

0.33,

0.33

-10 - 3.34.210

InGaN / TAG

on sapphire

VLMW41R1T1-5K8L-08 White 112 275 355 10 -

0.33,

0.33

-10 - 3.34.210

InGaN / TAG

on sapphire

VLMW41R1T1-5K8L-18 White 112 275 355 10 -

0.33,

0.33

-10 - 3.34.210

InGaN / TAG

on sapphire

VLMW41S1T1-8K8L-08 White 180 275 355 10 -

0.33,

0.33

-10 - 3.34.210

InGaN / TAG

on sapphire

VLMW41S1T2-5K6L-08 White 180 275 450 10 -

0.33,

0.33

-10 - 3.34.210

InGaN / TAG

on sapphire

VLMW41S1T2-6K7L-08 White 180 275 450 10 -

0.33,

0.33

-10 - 3.34.210

InGaN / TAG

on sapphire

VLMW41S1T2-7K8L-08 White 180 275 450 10 -

0.33,

0.33

-10 - 3.34.210

InGaN / TAG

on sapphire

VLMW41S1T2-5K5L-08 White 180 275 450 10 -

0.33,

0.33

-10 - 3.34.210

InGaN / TAG

on sapphire

VLMW41S1T2-6K6L-08 White 180 275 450 10 -

0.33,

0.33

-10 - 3.34.210

InGaN / TAG

on sapphire

VLMW41S1T2-8K8L-08 White 180 275 450 10 -

0.33,

0.33

-10 - 3.34.210

InGaN / TAG

on sapphire

Summary of content (8 pages)

PAGE 1
VLMW41.. www.vishay.com Vishay Semiconductors Standard SMD LED PLCC-2 FEATURES • High efficient InGaN technology • Chromaticity coordinate categorized according to CIE1931 per packing unit • Typical color temperature 5500 K • EIA and ICE standard package • Compatible with reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020 19225 DESCRIPTION • Available in 8 mm tape reel This device has been designed to meet the increasing demand for white SMD LED.
PAGE 2
VLMW41.. www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMW41.. PARAMETER DC forward current TEST CONDITION SYMBOL VALUE UNIT Tamb ≤ 80 °C IF 20 mA tp ≤ 10 μs IFSM 0.
PAGE 3
VLMW41.. www.vishay.com Vishay Semiconductors CHROMATICITY COORDINATED GROUPS FOR WHITE SMD LED 5L 5K 6L 6K X Y X Y 0.291 0.268 0.330 0.330 0.285 0.279 0.330 0.347 0.307 0.312 0.347 0.371 0.310 0.297 0.345 0.352 0.296 0.259 0.330 0.310 0.291 0.268 0.330 0.330 0.310 0.297 0.338 0.342 0.313 0.284 0.352 0.344 0.310 0.297 0.345 0.352 0.307 0.312 0.347 0.371 0.330 0.347 0.367 0.401 0.330 0.330 0.364 0.380 0.313 0.284 0.352 0.344 0.310 0.297 0.
PAGE 4
VLMW41.. www.vishay.com Vishay Semiconductors f - Chromaticity Coordinate Shift (x,y) 100 90 Irel - Relative Intensity 80 70 60 50 40 30 20 10 0 400 450 500 550 600 650 700 750 0.325 Y 0.275 0.250 0 IV rel - Relative Luminous Intensity IF - Forward Current (mA) 30 40 50 1.5 10 3.0 3.5 4.0 1.4 1.3 1.2 1.1 1 0.9 0.8 0.7 0.6 0.5 4.5 -40 VF - Forward Voltage (V) -20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 20914 Fig. 4 - Forward Current vs. Forward Voltage Fig.
PAGE 5
VLMW41.. www.vishay.com Vishay Semiconductors 0.40 8L 8K y-Coordinates 0.35 7L 7K 6L 6K 0.30 5L 5K 0.25 0.20 0.25 19784_3 0.27 0.29 0.31 0.33 0.35 0.37 x-Coordinates Fig. 9 - Coordinates of Colorgroups PACKAGE DIMENSIONS in millimeters 0.9 1.75 ± 0.1 3.5 ± 0.2 0.8 A C technical drawings according to DIN specifications 2.2 2.8 ± 0.15 Pin identification Dimensions in mm Ø 2.4 3 + 0.15 area covered with solderresist Mounting Pad Layout 4 2.6 (2.8) 1.2 1.6 (1.
PAGE 6
VLMW41.. www.vishay.com Vishay Semiconductors METHOD OF TAPING / POLARITY AND TAPE AND REEL SMD LED (VLM.3.../.4... - SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFERRED 10.4 8.4 120° 4.5 3.5 13.00 12.75 2.
PAGE 7
VLMW41.. www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example) RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: 106 A H • Storage temperature 10 °C to 30 °C VISHAY 37 • Storage humidity ≤ 60 % RH max. After more than 672 h under these conditions moisture content will be too high for reflow soldering.
PAGE 8
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.