Datasheet

ManualsBrandsVishay ManualsLEDsUV LED 405nm 3.2V 6.8mW PLCC-2

VLMU3100

www.vishay.com

Vishay Semiconductors

Rev. 1.2, 26-Jun-17

Document Number: 82556

For technical questions, contact: LED@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

UV SMD LED PLCC-2

DESCRIPTION

The package of the VLMU3100 series is the PLCC-2.

It consists of a lead frame which is embedded in a

white thermoplast. The reflector inside this package is filled

up with clear silicone which guarantees long life time.

The viewing angle is 120°, package dimensions are

3.2 mm x 2.8 mm x 1.9 mm.

PRODUCT GROUP AND PACKAGE DATA

• Product group: LED

• Package: SMD PLCC-2

• Product series: standard

• Angle of half intensity: ± 60°

•Lead-finishing: Ag

FEATURES

• UV SMD LED with exceptional brightness

• High efficient InGaN technology

• Long life time due to silicone casting

• Compatible with automatic placement

equipment

• EIA and ICE standard package

• Compatible with IR reflow and vapor phase

• Available in 8 mm tape

• Low profile package

• Non-diffused lens: excellent for coupling to light pipes and

backlighting

• Low power consumption

• Preconditioning according to JEDEC

level 2a

• ESD-withstand voltage: up to 1 kV according to

JESD22-A114-B

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Curing of glue and laquer

• Recognition of safety features of money bills

SAFETY ADVICES

Depending on the mode of operation, these devices emit

highly concentrated non visible ultraviolet light which can be

hazardous to the human eye. Products which incorporate

these devices have to follow the safety precautions given in

IEC 60825-1 “Safety of Laser Products”.

19225

PARTS TABLE

PART COLOR

RADIANT INTENSITY

(mW/sr)

at I

(mA)

WAVELENGTH

(nm)

at I

(mA)

FORWARD VOLTAGE

(V)

at I

(mA)

TECHNOLOGY

MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.

VLMU3100-GS08 Ultraviolet 1.8 2.5 3 20 400 405 410 20 2.8 3.2 3.8 20 InGaN

ABSOLUTE MAXIMUM RATINGS (T

amb

= 25 °C, unless otherwise specified)

VLMU3100

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

Forward current I

30 mA

Surge forward current t

≤ 10 μs I

FSM

0.1 A

Power dissipation P

tot

120 mW

Junction temperature T

+100 °C

Operating temperature range T

amb

-40 to +80 °C

Storage temperature range T

stg

-40 to +100 °C

Solder temperature T

sol

260/5 °C/s

Summary of content (6 pages)

PAGE 1
VLMU3100 www.vishay.com Vishay Semiconductors UV SMD LED PLCC-2 FEATURES • UV SMD LED with exceptional brightness • High efficient InGaN technology • Long life time due to silicone casting • Compatible equipment with automatic placement • EIA and ICE standard package 19225 • Compatible with IR reflow and vapor phase • Available in 8 mm tape DESCRIPTION • Low profile package The package of the VLMU3100 series is the PLCC-2. It consists of a lead frame which is embedded in a white thermoplast.
PAGE 2
VLMU3100 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMU3100, ULTRAVIOLET PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Radiant intensity IF = 20 mA le 1.8 2.5 3 mW/sr mW Radiant power IF = 20 mA φe - 6.8 - Peak wavelength IF = 20 mA λp 400 405 410 nm Angle of half intensity IF = 20 mA ϕ - ± 60 - deg Forward voltage IF = 20 mA VF 2.8 3.2 3.
PAGE 3
VLMU3100 www.vishay.com Vishay Semiconductors 2.4 Ie rel - Relative Radiant Intensity Relative Luminous Intensity (Tamb = 25 °C) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 2 4 6 8 10 12 14 16 18 20 IF - Forward Current (mA) Fig. 5 - Specific Luminous Intensity vs. Forward Current 2.0 1.6 1.2 0.8 0.4 0 -40 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 6 - Relative Radiant Intensity vs.
PAGE 4
VLMU3100 www.vishay.com Vishay Semiconductors METHOD OF TAPING/POLARITY AND TAPE AND REEL SMD LED (VLM3 - SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO 564) for automatic component insertation. The blister tape is a plastic strip with impressed component cavities, covered by a top tape.
PAGE 5
VLMU3100 www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example only) RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: A B C D • Storage temperature 10 °C to 30 °C L E I G F H M K A. 2D barcode • Storage humidity ≤ 60 % RH max.
PAGE 6
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.