Datasheet

VLMU1610-365-135
www.vishay.com
Vishay Semiconductors
Rev. 1.2, 18-Oct-2018
2
Document Number: 84374
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
• Tolerances: ± 11 % for φ
e
, ± 0.1 V for V
F
, ± 3 nm for λ
p
(1)
Reverse current is applied for reverse voltage test only (function test of Zener diode). The device is not designed for reverse operation.
Operating the LED under reverse current condition for long time might result in damage or failure of the component
Note
• The optical and electrical specification table shows the parameter ranges, comprising only a few classification groups. In order to ensure
availability, single groups for radiant intensity, wavelength, and forward voltage will not be orderable. Only one group for radiant intensity,
wavelength, and forward voltage will be shipped in any one reel
MARKING EXAMPLE FOR SELECTION CODE ON LABEL
Selection code: R5-P3N1-V2
• R5 range: 18 mW to 20 mW
• P3N1 range: 365 nm to 367.5 nm
• V2 range: 3.2 V to 3.6 V
OPTICAL AND ELECTRICAL CHARACTERISTICS (T
amb
= 25 °C, unless otherwise specified)
VLMU1610-365-135, ULTRAVIOLET
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Forward voltage I
F
= 20 mA V
F
2.8 3.5 4.0 V
Radiant power
I
F
= 20 mA
φ
e
14 23 26
mW
I
F
= 60 mA - 63 -
Ratio: radiant intensity/radiant flux I
F
= 20 mA l
e
/φ
e
-0.2-sr
-1
Peak wavelength I
F
= 20 mA λ
p
362.5 367 370 nm
Angle of half intensity I
F
= 20 mA ϕ - ± 67.5 - deg
Reverse voltage
(1)
I
R
= 10 μA V
R
--1.2V
Thermal resistance junction to case R
thJC
-53-K/W
RADIANT POWER CLASSIFICATION (I
F
= 20 mA)
GROUP MIN. MAX. UNIT
R3 14 16
mW
R4 16 18
R5 18 20
R6 20 22
R7 22 24
R8 24 26
PEAK WAVELENGTH CLASSIFICATION (I
F
= 20 mA)
GROUP MIN. MAX. UNIT
P3M2 362.5 365
nmP3N1 365 367.5
P3N2 367.5 370
FORWARD VOLTAGE CLASSIFICATION (I
F
= 20 mA)
GROUP MIN. MAX. UNIT
V1 2.8 3.2
VV2 3.2 3.6
V3 3.6 4.0