Datasheet

ManualsBrandsVishay ManualsLEDsSMD LED 611nm PLCC-2 8.5mcd 30mA

VLMO31..

www.vishay.com

Vishay Semiconductors

Rev. 1.6, 07-Mar-18

Document Number: 81333

For technical questions, contact: LED@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Standard SMD LED PLCC-2

DESCRIPTION

This device has been designed for applications requiring

narrow brightness and color selection.

The package of this device is the PLCC-2.

It consists of a lead frame which is embedded in a white

thermoplast. The reflector inside this package is filled up

with clear epoxy.

PRODUCT GROUP AND PACKAGE DATA

• Product group: LED

• Package: SMD PLCC-2

• Product series: standard

• Angle of half intensity: ± 60°

FEATURES

• SMD LED with exceptional brightness

• Luminous intensity categorized

• Compatible with automatic placement

equipment

• EIA and ICE standard package

• Compatible with IR reflow, vapor phase and

wave solder processes according to CECC

• Available in 8 mm tape

• Low profile package

• Non-diffused lens: excellent for coupling to

light pipes and backlighting

• Low power consumption

• Luminous intensity ratio in one packaging unit

Vmax.

Vmin.

≤ 1.6

• Preconditioning according to JEDEC

level 2a

• ESD-withstand voltage: up to 2 kV according to

JESD22-A114-B

• AEC-Q101 qualified

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Automotive: backlighting in dashboards and switches

• Telecommunication: indicator and backlighting in

telephone and fax

• Indicator and backlight for audio and video equipment

• Indicator and backlight in office equipment

• Flat backlight for LCDs, switches, and symbols

• General use

948553

PARTS TABLE

PART COLOR

LUMINOUS

INTENSITY

(mcd)

(mA)

WAVELENGTH

(nm)

(mA)

FORWARD

VOLTAGE

(V)

(mA)

TECHNOLOGY

MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX.

VLMO31J1K2-GS08 Soft orange 4.5 8.6 11.2 10 598 605 611 10 - 2.2 2.8 20 GaAsP on GaP

VLMO31J1K2-GS18 Soft orange 4.5 8.6 11.2 10 598 605 611 10 - 2.2 2.8 20 GaAsP on GaP

VLMO31J1L2-GS08 Soft orange 4.5 8.6 18 10 598 605 611 10 - 2.2 2.8 20 GaAsP on GaP

VLMO31J1L2-GS18 Soft orange 4.5 8.6 18 10 598 605 611 10 - 2.2 2.8 20 GaAsP on GaP

VLMO31K1L2-GS08 Soft orange 7.1 9 18 10 598 605 611 10 - 2.2 2.8 20 GaAsP on GaP

VLMO31K1L2-GS18 Soft orange 7.1 9 18 10 598 605 611 10 - 2.2 2.8 20 GaAsP on GaP

Summary of content (7 pages)

PAGE 1
VLMO31.. www.vishay.com Vishay Semiconductors Standard SMD LED PLCC-2 FEATURES • SMD LED with exceptional brightness • Luminous intensity categorized • Compatible with automatic placement equipment • EIA and ICE standard package • Compatible with IR reflow, vapor phase and wave solder processes according to CECC • Available in 8 mm tape • Low profile package 948553 • Non-diffused lens: excellent for coupling to light pipes and backlighting • Low power consumption • Luminous intensity IVmax./IVmin. ≤ 1.
PAGE 2
VLMO31.. www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C unless otherwise specified) VLMO31.. PARAMETER TEST CONDITION SYMBOL VALUE VR 6 V Tamb ≤ 60 °C IF 30 mA tp ≤ 10 μs IFSM 0.
PAGE 3
VLMO31.. www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 60 1.2 50 1.0 Irel - Relative Intensity IF - Forward Current (mA) soft orange 40 30 20 0.8 0.6 0.4 0.2 10 0 570 0 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 95 10905 590 610 630 670 650 λ - Wavelength (nm) 95 10324 Fig. 1 - Forward Current vs. Ambient Temperature Fig. 4 - Relative Intensity vs. Wavelength 10 000 100 I F - Forward Current (mA) tp/T = 0.
PAGE 4
VLMO31.. www.vishay.com Vishay Semiconductors 2.0 soft orange IV rel - Relative Luminous Intensity Ispec - Specific Luminous Intensity 2.4 2.0 1.6 1.2 0.8 0.4 1.2 0.8 0.4 0 0 95 10259 soft orange 1.6 10 20 50 100 200 500 I F (mA) 1 0.5 0.2 0.1 0.05 0.02 t p /T 0 95 9994 Fig. 7 - Relative Luminous Intensity vs. Forward Current/Duty Cycle 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 8 - Relative Luminous Intensity vs. Ambient Temperature 0.9 1.75 ± 0.
PAGE 5
VLMO31.. www.vishay.com Vishay Semiconductors METHOD OF TAPING / POLARITY AND TAPE AND REEL SMD LED (VLM.3 - SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFERRED 10.4 8.4 120° 4.5 3.5 13.00 12.75 2.5 1.
PAGE 6
VLMO31.. www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: 106 A H VISHAY 37 B C D E F G 20131 • Storage temperature 10 °C to 30 °C • Storage humidity ≤ 60 % RH max. After more than 672 h under these conditions moisture content will be too high for reflow soldering.
PAGE 7
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.