Datasheet

ManualsBrandsVISHAY ManualsDiodesVESD05A1B-02V-G-08

VESD05A1B-02V

www.vishay.com

Vishay Semiconductors

Rev. 1.1, 20-Jun-12

Document Number: 83368

For technical questions, contact: ESDprotection@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Single ESD-Protection Diode in SOD-523

MARKING (example only)

Bar = cathode marking

X = date code

Y = type code (see table below)

FEATURES

• Single-line ESD-protection

• Capacitance typical C

= 12 pF

= 2.5 V, f = 1 MHz)

• Leakage current I

< 1 μA (V

= 5 V)

• ESD-protection acc. IEC 61000-4-2

± 20 kV contact discharge

± 30 kV air discharge

•e3 - Sn

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

19344

20278

20279

ORDERING INFORMATION

DEVICE NAME ORDERING CODE

TAPED UNITS PER REEL

(8 mm TAPE ON 7" REEL)

MINIMUM ORDER QUANTITY

VESD05A1B-02V VESD05A1B-02V-G-08 3000 3000

PACKAGE DATA

DEVICE NAME

PACKAGE

NAME

TYPE

CODE

WEIGHT

MOLDING COMPOUND

FLAMMABILITY RATING

MOISTURE

SENSITIVITY LEVEL

SOLDERING

CONDITIONS

VESD05A1B-02V SOD-523

. H 1.4 mg UL 94 V-0

MSL level 1

(according J-STD-020)

260 °C/10 s at terminals

ABSOLUTE MAXIMUM RATINGS

PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT

Peak pulse current Acc. IEC 61000-4-5, 8/20 μs/single shot I

PPM

Peak pulse power Acc. IEC 61000-4-5, 8/20 μs/single shot P

33 W

ESD immunity

Contact discharge acc. IEC 61000-4-2; 10 pulses

ESD

± 20 kV

Air discharge acc. IEC 61000-4-2; 10 pulses ± 30 kV

Operating temperature Junction temperature T

- 40 to + 125 °C

Storage temperature T

stg

- 55 to + 150 °C

Summary of content (4 pages)

PAGE 1
VESD05A1B-02V www.vishay.com Vishay Semiconductors Single ESD-Protection Diode in SOD-523 FEATURES • Single-line ESD-protection • Capacitance typical CD = 12 pF (VR = 2.5 V, f = 1 MHz) 2 1 • Leakage current IR < 1 μA (VR = 5 V) 20278 • ESD-protection acc. IEC 61000-4-2 ± 20 kV contact discharge ± 30 kV air discharge 19344 • e3 - Sn MARKING (example only) • Material categorization: For definitions of compliance please see www.vishay.
PAGE 2
VESD05A1B-02V www.vishay.com Vishay Semiconductors BiAs-MODE (bidirectional asymmetrical protection mode) With the VESD05A1B-02V one signal- or data-lines (L1) can be protected against voltage transients. With pin 1 connected to ground and pin 2 connected to a signal- or data-line which has to be protected.
PAGE 3
VESD05A1B-02V www.vishay.com Vishay Semiconductors 0.7 (0.028) 1.7 (0.067) 0.9 (0.035) 1.5 (0.059) 0.7 (0.028) 0.5 (0.020) 0.1 (0.004) max. 0.08 (0.003) 0.20 (0.008) PACKAGE DIMENSIONS in millimeters (Inches): SOD-523 1.3 (0.051) 1.1 (0.043) 0.4 (0.016) 0.18 (0.007) 0.35 (0.014) foot print recommendation: 1.45 (0.057) Document no.: S8-V-3880.02-001 (4) Rev. h - Date: 13. Oct. 2010 0.35 (0.014) 16864 Rev. 1.
PAGE 4
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.