Datasheet

ManualsBrandsVishay ManualsCapacitorsMolded Case Tantalum Capacitor 15uF ±10% 2.5V

TMCP

www.vishay.com

Vishay Polytech

Revision: 16-Jan-17

Document Number: 40179

For technical questions, contact: polytech@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Solid Tantalum Surface Mount Chip Capacitors,

Molded Case, 0805 Size

PERFORMANCE / ELECTRICAL

CHARACTERISTICS

Operating Temperature: -55 °C to +125 °C

(above +85 °C, voltage derating is required)

Capacitance Range: 0.1 μF to 47 μF

Capacitance Tolerance: ± 10 %, ± 20 %

Voltage Rating: 2.5 V

to 25 V

FEATURES

• Small size, suitable for high-density packaging

• Terminations: 100 % matte tin

• Qualified to EIA-717

• Compatible with “high volume” automatic pick

and place equipment

• Moisture sensitivity level 1

• Material categorization:

for definitions of compliance please see

www.vishay.com/doc?99912

APPLICATIONS

• Industrial

• Audio and visual equipment

• General purpose

Available

ORDERING INFORMATION

TMC P 0J 107 M TR (2) F

TYPE CASE

CODE

DC VOLTAGE

RATING AT +85 °C

CAPACITANCE

(μF)

CAPACITANCE

TOLERANCE

PACKAGING

POLARITY

OPTIONAL TERMINAL

CODE

See

Ratings

and

Case

Codes

table.

0E = 2.5 V

0G = 4.0 V

0J = 6.3 V

1A = 10 V

1C = 16 V

1D = 20 V

1E = 25 V

This is expressed

in picofarads.

The first two

digits are the

significant

figures. The third

is the number of

zeros to follow.

K = ± 10 %

M = ± 20 %

TR = 7" reel,

cathodes close

to perforation

side

Halogen-free

(special order)

F =

lead (Pb)-free

terminations

DIMENSIONS in inches [millimeters]

CASE CODE EIA SIZE L W H l a

P 2012-12

0.080 ± 0.008

[2.0 ± 0.2]

0.049 ± 0.008

[1.25 ± 0.2]

0.047 max.

[1.2 max.]

0.020 ± 0.008

[0.5 ± 0.2]

0.035 ± 0.004

[0.9 ± 0.1]

Anode indication belt mark

Summary of content (12 pages)

PAGE 1
TMCP www.vishay.com Vishay Polytech Solid Tantalum Surface Mount Chip Capacitors, Molded Case, 0805 Size FEATURES • Small size, suitable for high-density packaging • Terminations: 100 % matte tin • Qualified to EIA-717 • Compatible with “high volume” automatic pick and place equipment Available • Moisture sensitivity level 1 PERFORMANCE / ELECTRICAL CHARACTERISTICS • Material categorization: for definitions of compliance please see www.vishay.
PAGE 2
TMCP www.vishay.com Vishay Polytech RATINGS AND CASE CODES 20 V 25 V 0.10 μF 2.5 V 4.0 V 6.3 V 10 V P P 0.15 P 0.22 P 0.33 P 0.47 P 0.68 P 1.0 16 V P P 1.5 P P P 2.2 P P P 3.3 P P 4.7 P P P 6.8 P P P P 10 15 P P P 22 P P P 33 P P 47 P P P P MARKING Anode indication belt mark DA Simplified code of rated voltage (D: 20 V) Simplified code of nominal capacitance (A: 0.1 μF) SIMPLIFIED VOLTAGE AND CAP CODES 20 25 0.10 μF 2.5 4.0 6.
PAGE 3
TMCP www.vishay.com Vishay Polytech STANDARD RATINGS CAPACITANCE (μF) CASE CODE 15 22 33 47 P P P P 15 22 33 47 P P P P 4.7 6.8 10 15 22 P P P P P 1.5 2.2 3.3 4.7 6.8 10 P P P P P P 1.0 1.5 2.2 3.3 4.7 P P P P P 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 P P P P P P P P P 0.10 0.47 1.0 P P P PART NUMBER MAX. DCL AT 25 °C (μA) MAX. DF AT 25 °C, 120 Hz (%) 2.5 VDC AT +85 °C; 1.6 VDC AT +125 °C TMCP0E156(1)TRF 0.5 8 TMCP0E226(1)TRF 0.6 10 TMCP0E336(1)TRF 0.8 20 TMCP0E476MTRF 11.
PAGE 4
TMCP www.vishay.com Vishay Polytech POWER DISSIPATION CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT +25 °C (W) IN FREE AIR P 0.
PAGE 5
Molded Guide www.vishay.com Vishay Polytech Guide for Tantalum and Niobium Solid Electrolyte Chip Capacitors INTRODUCTION Tantalum electrolytic capacitors are the preferred choice in applications where volumetric efficiency, stable electrical parameters, high reliability, and long service life are primary considerations.
PAGE 6
Molded Guide www.vishay.com Vishay Polytech SOLID ELECTROLYTE TANTALUM CAPACITORS TANTALUM CAPACITORS FOR ALL DESIGN CONSIDERATIONS Solid electrolyte capacitors contain manganese dioxide, which is formed on the tantalum pentoxide dielectric layer by impregnating the pellet with a solution of manganous nitrate. The pellet is then heated in an oven, and the manganous nitrate is converted to manganese dioxide.
PAGE 7
Molded Guide www.vishay.
PAGE 8
Molded Guide www.vishay.com Vishay Polytech SOLID TANTALUM CAPACITORS - MOLDED CASE SERIES TMCTX TMCH THC PRODUCT IMAGE TYPE FEATURES Solid tantalum surface mount chip capacitors, molded case Built-in fuse TEMPERATURE RANGE CAPACITANCE RANGE VOLTAGE RANGE High reliability -55 °C to +125 °C DISSIPATION FACTOR CASE SIZES -55 °C to +150 °C 1.0 μF to 68 μF 0.1 μF to 100 μF 0.
PAGE 9
Molded Guide www.vishay.com Vishay Polytech PLASTIC TAPE AND REEL PACKAGING DIMENSIONS in millimeters E A B C Label D W CASE CODE TAPE WIDTH A+0/-3 B+1/0 C ± 0.2 D ± 0.5 E ± 0.5 W ± 0.3 J, P, A, UA, B, UB 8 C, E, F 12 Ø 180 Ø 60 Ø 13 Ø 21 2.0 9.0 13.0 TAPE SIZE in millimeters Pocket Perforation E Ø 1.5 + 0.10 F B W A P1 t Direction of tape flow 4.0 ± 0.1 2.0 ± 0.
PAGE 10
Molded Guide www.vishay.com Vishay Polytech RECOMMENDED REFLOW PROFILES Capacitors should withstand reflow profile as per J-STD-020 standard TEMPERATURE (°C) Tp tp Max. ramp-up rate = 3 °C/s Max. ramp-down rate = 6 °C/s TL Ts max. TC - 5 °C tL Preheat area Ts min. ts 25 Time 25 °C to peak TIME (s) PROFILE FEATURE Preheat / soak Temperature min. (Ts min.) Temperature max. (Ts max.) Time (ts) from (Ts min. to Ts max.
PAGE 11
Molded Guide www.vishay.com Vishay Polytech GUIDE TO APPLICATION 1. AC Ripple Current: the maximum allowable ripple current shall be determined from the formula: I R MS = 4. P -----------R ESR where, P= 2. At 85 °C: 5 % of the rated voltage or 0.5 V, whichever is smaller. power dissipation in W at +25 °C as given in the tables in the product datasheets. RESR = the capacitor equivalent series resistance at the specified frequency. 5. Mounting Precautions: 5.
PAGE 12
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.