Datasheet

TLHG4900, TLHR4900, TLHY4900
www.vishay.com
Vishay Semiconductors
Rev. 2.4, 24-Mar-15
6
Document Number: 83009
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE DIMENSIONS in millimeters
TAPE
Fig. 19 - LED in Tape
AMMOPACK
Fig. 20 - Tape Direction
Note
• The new nomenclature for ammopack is e.g. ASZ only, without
suffix for the LED orientation. The carton box has to be turned to
the desired position: “+” for anode first, or “-” for cathode first.
AS12Z and AS21Z are still valid for already existing types, BUT
NOT FOR NEW DESIGN.
Drawing-No.: 6.544-5255.02-4
Issue: 5; 28.07.14
3.2 ± 0.15
Ø 2.9 ± 0.1
< 0.6
3.4 ± 0.15
4.4 ± 0.3
6.1 ± 0.3
34.7 ± 0.5
1.5 ± 0.5
2.54 nom.
AC
AREA NOT PLANE
(2.8)
R1.4 (sphere)
technical drawings
according to DIN
specications
0.5
+ 0.2
- 0.1
0.4
+ 0.15
- 0.05
Paper
Adhesive tape
Identification label
Reel
Tape
Diodes: anode before cathode
Phototransistors: emitter before collector
Code 21
Diodes:
cathode before anode
Phototransistors:
collector before emitter
Code 12
94 8671
Tape feed direction
Diodes: cathode before anode
Transistors: collector before emitter
abel
Tape feed direction
94 8667-2
Diodes: anode before cathode
Transistors: emitter before collecto