Datasheet

TLHY5800, TLHG5800, TLHP5800
www.vishay.com
Vishay Semiconductors
Rev. 1.8, 29-Apr-13
2
Document Number: 83013
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1)
In one packing unit I
Vmin.
/I
Vmax.
 0.5
Note
(1)
In one packing unit I
Vmin.
/I
Vmax.
 0.5
Note
(1)
In one packing unit I
Vmin.
/I
Vmax.
 0.5
Note
• Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %.
The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each
bag (there will be no mixing of two groups on each bag).
In order to ensure availability, single brightness groups will not be orderable.
In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one bag.
In order to ensure availability, single wavelength groups will not be orderable.
OPTICAL AND ELECTRICAL CHARACTERISTICS (T
amb
= 25 °C, unless otherwise specified)
TLHY5800, YELLOW
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity
(1)
I
F
= 20 mA I
V
100 250 - mcd
Dominant wavelength I
F
= 10 mA 
d
581 - 594 nm
Peak wavelength I
F
= 10 mA 
p
- 585 - nm
Angle of half intensity I
F
= 10 mA  -± 4-deg
Forward voltage I
F
= 20 mA V
F
-2.43 V
Reverse voltage I
R
= 10 μA V
R
615- V
Junction capacitance V
R
= 0 V, f = 1 MHz C
j
-50-pF
OPTICAL AND ELECTRICAL CHARACTERISTICS (T
amb
= 25 °C, unless otherwise specified)
TLHG5800, GREEN
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity
(1)
I
F
= 20 mA I
V
430 700 - mcd
Dominant wavelength I
F
= 10 mA 
d
562 - 575 nm
Peak wavelength I
F
= 10 mA 
p
- 565 - nm
Angle of half intensity I
F
= 10 mA  -± 4-deg
Forward voltage I
F
= 20 mA V
F
-2.43 V
Reverse voltage I
R
= 10 μA V
R
615- V
Junction capacitance V
R
= 0 V, f = 1 MHz C
j
-50-pF
OPTICAL AND ELECTRICAL CHARACTERISTICS (T
amb
= 25 °C, unless otherwise specified)
TLHP5800, PURE GREEN
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Luminous intensity
(1)
I
F
= 20 mA I
V
25 85 - mcd
Dominant wavelength I
F
= 10 mA 
d
555 - 565 nm
Peak wavelength I
F
= 10 mA 
p
- 555 - nm
Angle of half intensity I
F
= 10 mA  -± 4-deg
Forward voltage I
F
= 20 mA V
F
-2.43 V
Reverse voltage I
R
= 10 μA V
R
615- V
Junction capacitance V
R
= 0 V, f = 1 MHz C
j
-50-pF
LUMINOUS INTENSITY CLASSIFICATION
GROUP LIGHT INTENSITY (mcd)
STANDARD MIN. MAX.
BB 430 860
CC 575 1150
DD 750 1500
EE 1000 2000
FF 1350 2700