Datasheet

TFBS4711
www.vishay.com
Vishay Semiconductors
Rev. 3.1, 03-Jul-2018
3
Document Number: 82633
For technical questions within your region: irdasupportAM@vishay.com
, irdasupportAP@vishay.com, irdasupportEU@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
Reference point ground, pin 6 unless otherwise noted.
Typical values are for design aid only, not guaranteed nor subject to production testing.
We apologize to use sometimes in our documentation the abbreviation LED and the word light emitting diode instead of infrared emitting
diode (IRED) for IR-emitters. That is by definition wrong; we are here following just a bad trend
Note
Vishay transceivers operating inside the absolute maximum ratings are classified as eye safe according the above table
ABSOLUTE MAXIMUM RATINGS
PARAMETER TEST CONDITIONS SYMBOL MIN. TYP. MAX. UNIT
Supply voltage range, transceiver -0.3 V < V
CC2
< 6 V V
CC1
-0.5 - +6 V
Supply voltage range, transmitter -0.5 V < V
CC1
< 6 V V
CC2
-0.5 - +6 V
RXD output voltage -0.5 V < V
CC1
< 6 V V
RXD
-0.5 - V
CC1
+ 0.5 V
Voltage at all inputs Note: V
in
V
CC1
is allowed V
in
-0.5 - +6 V
Input current For all pins except IRED anode pin I
CC
--10mA
Output sink current --25mA
Power dissipation See derating curve P
D
- - 250 mW
Junction temperature T
j
- - 125 °C
Ambient temperature range (operating) T
amb
-25 - +85 °C
Storage temperature range
T
stg
-40 - +100 °C
Soldering temperature See recommended solder profile - - 260 °C
Average output current, pin 1 I
IRED
(DC) - - 85 mA
Repetitive pulsed output current
pin 1 to pin 2
t < 90 μs, t
on
< 20 % I
IRED
(RP) - - 430 mA
ESD protection V
ESD
1- -kV
Latchup |± 100| - - mA
EYE SAFETY INFORMATION
STANDARD CLASSIFICATION
IEC/EN 60825-1 (2007-03), DIN EN 60825-1 (2008-05) “SAFETY OF LASER PRODUCTS -
Part 1: equipment classification and requirements”, simplified method
Class 1
IEC 62471 (2006), CIE S009 (2002) “Photobiological Safety of Lamps and Lamp Systems” Exempt
DIRECTIVE 2006/25/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 5
th
April 2006 on the
minimum health and safety requirements regarding the exposure of workers to risks arising from physical agents
(artificial optical radiation) (19
th
individual directive within the meaning of article 16(1) of directive 89/391/EEC)
Exempt