Datasheet

ManualsBrandsVishay ManualsCapacitorsTantalum Capacitor with Polymer Cathode 47uF ±20% 35V

T59

www.vishay.com

Vishay

Revision: 09-Apr-2019

Document Number: 40191

For technical questions, contact: polytech@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

vPolyTan

Polymer Surface Mount Chip Capacitors,

Low ESR, Leadframeless Molded Type

DESIGN SUPPORT TOOLS AVAILABLE

PERFORMANCE / ELECTRICAL

CHARACTERISTICS

Operating Temperature: -55 °C to +105 °C

Capacitance Range: 15 μF to 470 μF

Capacitance Tolerance: ± 10 %, ± 20 % standard

Voltage Rating: 16 V

to 75 V

FEATURES

• Ultra low ESR

• 100 % surge current tested

• Accelerated voltage conditioning

• High ripple current capability

• Stable capacitance in operating temperature

range

• Better capacitance stability vs. frequency

• No wear out effect

• Molded case 7343 EIA size

• Terminations: wraparound

• 12 mm tape and 7" (178 mm) reel packaging per EIA-481

standard

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

Note

This datasheet provides information about parts that are



RoHS-compliant and / or parts that are non RoHS-compliant. For



example, parts with lead (Pb) terminations are not RoHS-compliant.



Please see the information / tables in this datasheet for details

APPLICATIONS

• Decoupling, smoothing, filtering

• Bulk energy storage in Solid State Drives (SSD)

• Infrastructure equipment

• Storage and networking

• Computer motherboards

• Smartphones and tablets

3D Models

Models

Calculators

Available

ORDERING INFORMATION

T59 EE 337 M 016 C 0025

TYPE CASE

CODE

CAPACITANCE CAPACITANCE

TOLERANCE

DC VOLTAGE

RATING

TERMINATION /

PACKAGING

ESR

See

Ratings

and

Case

Codes

table.

This is expressed in

picofarads. The first

two digits are the

significant figures.

The third is the

number of zeros

to follow.

K = ± 10 %

M = ± 20 %

This is expressed

in volts. To

complete the

three-digit block,

zeros precede the

voltage rating.

A decimal point is

indicated by an “R”

(6R3 = 6.3 V)

E = Sn / Pb solder /

7" (178 mm) reel

C = 100 % tin /

7" (178 mm) reel

Maximum

100 kHz ESR

in m

DIMENSIONS in inches [millimeters]

CASE CODE EIA SIZE H (MAX.) L W P1 P2 (REF.)

EE 7343-43

0.169

[4.3]

0.287 ± 0.012

[7.3 ± 0.3]

0.169 ± 0.012

[4.3 ± 0.3]

0.051 ± 0.012

[1.3 ± 0.3]

0.191

[4.85]

Anode polarity bar

Anode termination

P2P1

Cathode termination

Summary of content (15 pages)

PAGE 1
T59 www.vishay.com Vishay vPolyTanTM Polymer Surface Mount Chip Capacitors, Low ESR, Leadframeless Molded Type FEATURES • • • • • • • • • • • DESIGN SUPPORT TOOLS AVAILABLE 3D 3D 3D Models Models Ultra low ESR 100 % surge current tested Available Accelerated voltage conditioning High ripple current capability Available Stable capacitance in operating temperature range Available Better capacitance stability vs.
PAGE 2
T59 www.vishay.com Vishay RATINGS AND CASE CODES (ESR m) μF 15 22 47 150 220 330 470 16 V 30 V 35 V 50 V 63 V EE (100) EE (100) EE (100) 75 V EE (100) (1) EE (100) (1) EE (70, 55) EE (150, 75) EE (25) EE (25) EE (25, 20) Note (1) Rating in development, contact factory for availability MARKING +++ T59 Family Capacitance 2 330 16V Polarity mark Vishay logo Voltage STANDARD RATINGS CAPACITANCE CASE (μF) CODE PART NUMBER MAX.
PAGE 3
T59 www.vishay.com Vishay RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperature below +105 °C) CAPACITOR VOLTAGE RATING OPERATING VOLTAGE 16 12.8 25 20.0 30 24.0 35 28.0 50 40.0 63 50.4 75 60.0 CAPACITANCE VS. FREQUENCY IMPEDANCE AND ESR VS. FREQUENCY T59EE337M016E0025 T59EE337M016E0025 10000 100 Capacitance 1000 Impedance 0.1 ESR 0.
PAGE 4
T59 www.vishay.
PAGE 5
Polymer Guide www.vishay.com Vishay Guide for Tantalum Solid Electrolyte Chip Capacitors with Polymer Cathode INTRODUCTION Tantalum electrolytic capacitors are the preferred choice in applications where volumetric efficiency, stable electrical parameters, high reliability, and long service life are primary considerations.
PAGE 6
Polymer Guide www.vishay.com Vishay SOLID ELECTROLYTE POLYMER TANTALUM CAPACITORS Solid electrolyte polymer capacitors utilize sintered tantalum pellets as anodes. Tantalum pentoxide dielectric layer is formed on the entire surface of anode, which is further impregnated with highly conductive polymer as cathode system.
PAGE 7
Polymer Guide www.vishay.
PAGE 8
Polymer Guide www.vishay.com Vishay POLYMER CAPACITORS - MOLDED CASE SERIES T55 PRODUCT IMAGE VPolyTanTM, molded case, high performance polymer High performance -55 °C to +105 °C 3.3 μF to 1000 μF 2.5 V to 63 V ± 20 % 0.
PAGE 9
Polymer Guide www.vishay.com Vishay MOLDED CAPACITORS, T55 TYPE PLASTIC TAPE AND REEL PACKAGING DIMENSIONS in millimeters E A B C Label D W TAPE WIDTH A+0/-3 B+1/0 C ± 0.2 D ± 0.5 E ± 0.5 W ± 0.3 8 12 Ø 180 Ø 60 Ø 13 Ø 21 2.0 9.0 13.0 Note • A reel diameter of 330 mm is also applicable PLASTIC TAPE SIZE DIMENSIONS in millimeters Pocket Perforation E Ø 1.5 + 0.10 W B F A P1 t Direction of tape flow 4.0 ± 0.1 2.0 ± 0.
PAGE 10
Polymer Guide www.vishay.com Vishay LEADFRAMELESS MOLDED CAPACITORS, ALL TYPES PLASTIC TAPE AND REEL PACKAGING in inches [millimeters] 0.157 ± 0.004 [4.0 ± 0.10] Tape thickness Deformation between embossments 0.014 [0.35] max. 0.059 + 0.004 - 0.0 [1.5 + 0.10 - 0.0] Top cover tape B1 (max.) (6) 10 pitches cumulative tolerance on tape ± 0.008 [0.200] Embossment 0.079 ± 0.002 0.069 ± 0.004 [2.0 ± 0.05] [1.75 ± 0.10] A0 K0 0.030 [0.75] min. (3) B0 0.030 [0.75] min.
PAGE 11
Polymer Guide www.vishay.com Vishay CARRIER TAPE DIMENSIONS in inches [millimeters] CASE CODE TAPE SIZE B1 (MAX.) (1) D1 (MIN.) F K0 (MAX.) P1 W 0.071 [1.8] 0.315 ± 0.004 [8.0 ± 0.10] 0.476 ± 0.008 [12.1 ± 0.20] E5 12 mm 0.329 [8.35] 0.059 [1.5] 0.217 ± 0.002 [5.50 ± 0.05] MM (2) 8 mm 0.075 [1.91] 0.02 [0.5] 0.138 [3.5] 0.043 [1.10] 0.157 [4.0] 0.315 [8.0] M1 12 mm 0.32 [8.2] 0.059 [1.5] 0.217 ± 0.002 [5.5 ± 0.05] 0.094 [2.39] 0.315 ± 0.04 [8.0 ± 1.0] 0.472 + 0.012 / - 0.
PAGE 12
Polymer Guide www.vishay.com Vishay PACKING AND STORAGE Polymer capacitors meet moisture sensitivity level rating (MSL) of 3 or 4 as specified in IPC/JEDEC® J-STD-020 and are dry packaged in moisture barrier bags (MBB) per J-STD-033. MSL for each particular family is defined in the datasheet - either in “Features” section or “Standard Ratings” table. Level 3 specifies a floor life (out of bag) of 168 hours and level 4 specifies a floor life of 72 hours at 30 °C maximum and 60 % relative humidity (RH).
PAGE 13
Polymer Guide www.vishay.com Vishay MOLDED CAPACITORS, T55 TYPE PAD DIMENSIONS in millimeters L X Capacitor Pattern Y W G Z CAPACITOR SIZE PAD DIMENSIONS CASE / DIMENSIONS L W G (max.) Z (min.) X (min.) Y (Ref.) J 1.6 0.8 0.7 2.5 1.0 0.9 P 2.0 1.25 0.5 2.6 1.2 1.05 A 3.2 1.6 1.1 3.8 1.5 1.35 T/B 3.5 2.8 1.4 4.1 2.7 1.35 Z/V/D 7.3 4.3 4.1 8.2 2.9 2.
PAGE 14
Polymer Guide www.vishay.com Vishay GUIDE TO APPLICATION 1. AC Ripple Current: the maximum allowable ripple current shall be determined from the formula: I R MS = 4. Reverse Voltage: the capacitors are not intended for use with reverse voltage applied. However, they are capable of withstanding momentary reverse voltage peaks, which must not exceed the following values: At 25 °C: 10 % of the rated voltage or 1 V, whichever is smaller. At 85 °C: 5 % of the rated voltage or 0.5 V, whichever is smaller.
PAGE 15
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.