Datasheet

SFH6916
www.vishay.com
Vishay Semiconductors
Rev. 2.1, 12-Apr-13
2
Document Number: 83687
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1)
Refer to reflow profile for soldering conditions for surface mounted devices.
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
COUPLER
Isolation test voltage
between emitter and detector
t = 1.0 s V
ISO
3750 V
RMS
Isolation resistance
V
IO
= 500 V, T
amb
= 25 °C R
IO
10
12

V
IO
= 500 V, T
amb
= 100 °C R
IO
10
11

Storage temperature range T
stg
- 55 to + 125 °C
Ambient temperature range T
amb
- 55 to + 100 °C
Junction temperature T
j
100 °C
Soldering temperature
(1)
max. 10 s dip soldering distance
to seating plane 1.5 mm
260 °C
Total power dissipation P
tot
700 mW
ELECTRICAL CHARACTERISTICS (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
INPUT
Forward voltage I
F
= 5 mA V
F
1.15 1.4 V
Reverse current V
R
= 6 V I
R
0.01 10 μA
Capacitance C
O
C
O
14 pF
Thermal resistance R
thja
1000 K/W
OUTPUT
Collector emitter leakage current V
CE
= 20 V I
CEO
100 nA
Collector emitter capacitance V
CE
= 5 V, f = 1 MHz C
CE
2.8 pF
Thermal resistance R
thja
500 K/W
COUPLER
Collector emitter saturation voltage I
F
= 20 mA, I
C
= 1 mA V
CEsat
0.1 0.4 V
Coupling capacitance f = 1 MHz C
C
1pF
CURRENT TRANSFER RATIO (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Current transfer ratio I
F
= 5 mA, V
CC
= 5 V CTR 50 300 %
ABSOLUTE MAXIMUM RATINGS (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT