Datasheet

SFH690AB, SFH690A, SFH690B, SFH690C, SFH690D
www.vishay.com
Vishay Semiconductors
Rev. 2.6, 17-Nov-15
3
Document Number: 83686
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
Fig. 2 - Switching Operation (without saturation)
ELECTRICAL CHARACTERISTICS (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
INPUT
Forward voltage I
F
= 5 mA V
F
- 1.15 1.4 V
Reverse current V
R
= 6 V I
R
-0.0110μA
Capacitance V
R
= 0 V, f = 1 MHz C
O
-14-pF
Thermal resistance R
thJA
- 750 - K/W
OUTPUT
Collector emitter leakage current V
CE
= 20 V I
CEO
- - 100 nA
Collector emitter capacitance V
CE
= 5 V, f = 1 MHz C
CE
-2.8- pF
Thermal resistance R
thJA
- 500 - K/W
COUPLER
Collector emitter saturation voltage I
F
= 10 mA, I
C
= 2 mA V
CEsat
-0.10.3V
Coupling capacitance f = 1 MHz C
C
-0.3- pF
CURRENT TRANSFER RATIO (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
I
C
/I
F
I
F
= 5 mA, V
CE
= 5 V
SFH690ABT CTR 50 - 300 %
SFH690AT CTR 50 - 150 %
SFH690BT CTR 100 - 300 %
SFH690CT CTR 100 - 200 %
SFH690DT CTR 200 - 400 %
SWITCHING CHARACTERISTICS (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Rise time I
C
= 2 mA, V
CC
= 5 V, R
L
= 100 Ω t
r
-3-μs
Fall timet I
C
= 2 mA, V
CC
= 5 V, R
L
= 100 Ω t
f
-4-μs
Turn-on time I
C
= 2 mA, V
CC
= 5 V, R
L
= 100 Ω t
on
-5-μs
Turn-off time I
C
= 2 mA, V
CC
= 5 V, R
L
= 100 Ω t
off
-3-μs
isfh690at_01
R
L
=100Ω
V
CC
=5V
50 Ω
I
F