Datasheet

ManualsBrandsVishay ManualsOpto- & Photo CouplersOptocoupler DIP-4 70 V

SFH620A, SFH6206

www.vishay.com

Vishay Semiconductors

Rev. 2.3, 31-Aug-15

Document Number: 83675

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Optocoupler, Phototransistor Output, AC Input

DESCRIPTION

The SFH620A (DIP) and SFH6206 (SMD) feature a high

current transfer ratio, low coupling capacitance and high

isolation voltage. These couplers have a GaAs infrared

diode emitter, which is optically coupled to a silicon planar

phototransistor detector, and is incorporated in a plastic

DIP-4 or SMD package.

The coupling devices are designed for signal transmission

between two electrically separated circuits. The couplers

are end-stackable with 2.54 mm lead spacing. Creepage

and clearance distances of > 8 mm are achieved with

option 6. This version complies with IEC 60950

(DIN VDE 0805) for reinforced insulation to an operation

voltage of 400 V

RMS

or DC.

FEATURES

• Good CTR linearity depending on forward

current

• Isolation test voltage, 5300 V

RMS

• High collector emitter voltage, V

CEO

= 70 V

• Low saturation voltage

• Fast switching times

• Low CTR degradation

• Temperature stable

• Low coupling capacitance

• End-stackable, 0.100" (2.54 mm) spacing

• High common-mode interference immunity

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

AGENCY APPROVALS

The safety application model number covering all products

in this datasheet is SFH620A and SHF6206. This model

number should be used when consulting safety agency

documents.

• UL1577, file no. E52744 system code H, double protection

• CSA 93751

• BSI EN 60950, EN 60065

• DIN EN 60747-5-5 (VDE 0884-5), available with option 1

• CQC GB8898-2011, GB4943.1-2011

Notes

• Additional options may be possible, please contact sales office.

(1)

Also available in tubes; do not add T to end.

CA/C

C/A

ORDERING INFORMATION

SFH620x-#X0##T

PART NUMBER CTR

BIN

PACKAGE OPTION TAPE

AND

REEL

AGENCY

CERTIFIED/PACKAGE

CTR (%)

± 10 mA

SFH620A SFH6206

UL, cUL, BSI 40 to 125 63 to 200 100 to 320 40 to 125 63 to 200 100 to 320

DIP-4 SFH620A-1 SFH620A-2 SFH620A-3 - - -

DIP-4, 400 mil, option 6 SFH620A-1X006 SFH620A-2X006 SFH620A-3X006 - - -

SMD-4, option 7 - SFH620A-2X007T

(1)

-- - -

SMD-4, option 9 - - - SFH6206-1T

(1)

SFH6206-2T

(1)

SFH6206-3T

(1)

VDE, UL, CUL, BSI 40 to 125 63 to 200 100 to 320 40 to 125 63 to 200 100 to 320

DIP-4 SFH620A-1X001 SFH620A-2X001 SFH620A-3X001 - - -

DIP-4, 400 mil, option 6 - SFH620A-2X016 SFH620A-3X016 - - -

SMD-4, option 7 - SFH620A-2X017T - - - -

SMD-4, option 9 - - - - SFH6206-2X001T

(1)

SFH6206-3X001T

(1)

> 0.1 mm

10.16 mm

> 0.7 mm

7.62 mm

DIP-#

Option 7

Option 6

Option 9

Summary of content (9 pages)

PAGE 1
SFH620A, SFH6206 www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, AC Input FEATURES A/C 1 4 C C/A 2 3 E • Good CTR linearity depending on forward current • Isolation test voltage, 5300 VRMS • High collector emitter voltage, VCEO = 70 V • Low saturation voltage • Fast switching times • Low CTR degradation • Temperature stable • Low coupling capacitance • End-stackable, 0.100" (2.
PAGE 2
SFH620A, SFH6206 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT tp ≤ 10 μs IF ± 60 mA IFSM ± 2.
PAGE 3
SFH620A, SFH6206 www.vishay.com Vishay Semiconductors CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION VCE = 5 V, IF = ± 10 mA IC/IF VCE = 5 V, IF = ± 1 mA PART SFH620A-1 SFH6206-1 SFH620A-2 SFH6206-2 SFH620A-3 SFH6206-3 SFH620A-1 SFH6206-1 SFH620A-2 SFH6206-2 SFH620A-3 SFH6206-3 SYMBOL CTR CTR CTR CTR CTR CTR CTR CTR CTR CTR CTR CTR MIN. 40 40 63 63 100 100 13 13 22 22 34 34 TYP. MAX.
PAGE 4
SFH620A, SFH6206 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 20 103 f = 1 MHz IF = 10 mA, VCC = 5 V IC (%) IF 15 C (pF) 3 2 102 10 1 5 CCE 101 - 25 0 0 25 TA (°C) isfh620a_01 50 10-2 75 Fig. 2 - Current Transfer Ratio (CTR) vs. Temperature 104 IF = 14 mA D=0 0.005 0.01 0.02 20 IF (mA) IF = 12 mA IC (mA) 100 101 Ve (V) IF = 10 mA IF = 8 mA IF = 6 mA 10 103 D= tp T 0.05 0.1 tp IF T Pulse cycle D = parameter 0.
PAGE 5
SFH620A, SFH6206 www.vishay.com Vishay Semiconductors 120 Ptot = f (TA) IF (mA) 90 60 30 0 0 25 50 75 100 TA (°C) isfh620a_07 Fig. 8 - Permissible Diode Forward Current vs. Ambient Temperature PACKAGE DIMENSIONS in millimeters DIP-4, Standard 5.10 max. 7.62 typ. 4.70 ± 0.15 6.60 ± 0.25 0.50 min. 1.27 ± 0.10 0.50 ± 0.10 2.54 typ. Pin one I.D. Rev. 2.3, 31-Aug-15 3.10 ± 0.50 3.55 ± 0.25 0.70 min. 4 3 1 2 .10 0.
PAGE 6
SFH620A, SFH6206 www.vishay.com Vishay Semiconductors DIP-4, Option 6 10.16 typ. 5.10 max. 7.62 typ. 4.70 ± 0.15 6.60 ± 0.25 0.10 min. 3.55 ± 0.25 0.70 min. 1.27 ± 0.10 2.54 typ. Pin one I.D. 4 3 1 2 0.25 ± 0.10 3.05 ± 0.50 0.50 ± 0.10 10.55 ± 0.40 SMD-4, Option 7 10.30 max. 5.10 max. 7.62 typ. 4.70 ± 0.15 6.60 ± 0.25 1.27 ± 0.10 8.00 min. 0.50 min. Leads coplanarity 0.1 max. 2.54 typ. 3 .25 R0 1.78 2.54 0.76 4 4.30 ± 0.30 0.25 ± 0.10 0.50 min. 3.55 ± 0.25 0.70 min.
PAGE 7
SFH620A, SFH6206 www.vishay.com Vishay Semiconductors SMD-4, Option 9 10.05 max. 5.10 max. 7.62 typ. 4.70 ± 0.15 6.60 ± 0.25 3.55 ± 0.25 0.20 ± 0.10 0.25 ± 0.10 0.70 min. 1.27 ± 0.10 0.50 min. Leads coplanarity 0.1 max. 8.00 min. 2.54 typ. 4 0.76 3 2.54 .25 1.78 R0 1.52 8.00 min. Pin one I.D. 11.05 1 2 PACKAGE MARKING (example) YWW H 68 SFH620A-1 V X001 Notes • Only options 1 and 7 are reflected in the package marking. • The VDE logo is only marked on option1 parts.
PAGE 8
SFH620A, SFH6206 www.vishay.com Vishay Semiconductors HANDLING AND STORAGE CONDITIONS ESD level: HBM class 2 Floor life: unlimited Conditions: Tamb < 30 °C, RH < 85 % Moisture sensitivity level 1, according to J-STD-020 Rev. 2.3, 31-Aug-15 Document Number: 83675 8 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.
PAGE 9
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.