Datasheet

ManualsBrandsVishay ManualsOpto- & Photo CouplersOptocoupler DIP-4 SMD 55V

SFH618A, SFH6186

www.vishay.com

Vishay Semiconductors

Rev. 2.8, 29-Mar-18

Document Number: 83673

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Optocoupler, Phototransistor Output, Low Input Current

DESCRIPTION

The SFH618A (DIP) and SFH6186 (SMD) feature a high

current transfer ratio, low coupling capacitance and high

isolation voltage. These couplers have a GaAs infrared

diode emitter, which is optically coupled to silicon planar

phototransistor detector, and is incorporated in a plastic

DIP-4 or SMD package.

The coupling devices are designed for signal transmission

between two electrically separated circuits.The couplers are

end-stackable with 2.54 mm lead spacing. Creepage and

clearance distances of > 8 mm achieved with option 6.

FEATURES

• Good CTR linearity depending on forward current

• Low CTR degradation

• High collector emitter voltage, V

CEO

= 55 V

• Isolation test voltage, 5300 V

RMS

• Low coupling capacitance

• End stackable, 0.100" (2.54 mm) spacing

• High common mode transient immunity

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Telecom

• Industrial controls

• Battery powered equipment

• Office machines

AGENCY APPROVALS

The safety application model number covering all products

in this datasheet is SFH618A. This model number should be

used when consulting safety agency documents.

• UL1577

•cUL

•CSA

• DIN EN 60747-5-5 (VDE 0884-5) available with option 1

•BSI

•FIMKO

Notes

• Additional options may be possible, please contact sales office

(1)

Also available in tubes, do not put T to the end

i179061-1

ORDERING INFORMATION

SFH618# - #X0##T

PART NUMBER CTR

BIN

PACKAGE OPTION TAPE

AND

REEL

AGENCY

CERTIFIED/PACKAGE

CTR (%)

1 mA

UL, cUL 63 to 125 100 to 200 160 to 320 250 to 500

DIP-4 SFH618A-2 SFH618A-3 SFH618A-4 SFH618A-5

DIP-4, 400 mil, option 6 - SFH618A-3X006 - -

SMD-4, option 7 - - - SFH618A-5X007T

(1)

SMD-4, option 9 SFH6186-2T

(1)

SFH6186-3T

(1)

, SFH6186-3T1 SFH6186-4T

(1)

SFH6186-5T

(1)

SFH6186-5T1

VDE, UL, cUL 63 to 125 100 to 200 160 to 320 250 to 500

DIP-4 - SFH618A-3X001 SFH618A-4X001 -

DIP-4, 400 mil, option 6 - SFH618A-3X016 SFH618A-4X016 SFH618A-5X016

SMD-4, option 7 - SFH618A-3X017T

(1)

- SFH618A-5X017T

(1)

SMD-4, option 9 -

SFH6186-3X001T

(1)

SFH6186-3X001T1

SFH6186-4X001T SFH6186-5X001T

(1)

> 0.1 mm

10.16 mm

> 0.7 mm

7.62 mm

DIP-#

Option 7

Option 6

Option 9

Summary of content (10 pages)

PAGE 1
SFH618A, SFH6186 www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, Low Input Current FEATURES A 1 4 C C 2 3 E • • • • • • • • 1 Good CTR linearity depending on forward current Low CTR degradation High collector emitter voltage, VCEO = 55 V Isolation test voltage, 5300 VRMS Low coupling capacitance End stackable, 0.100" (2.54 mm) spacing High common mode transient immunity Material categorization: for definitions of compliance please see www.vishay.
PAGE 2
SFH618A, SFH6186 www.vishay.
PAGE 3
SFH618A, SFH6186 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage IF = 5 mA VF - 1.1 1.5 V Reverse current VR = 6 V IR - 0.01 10 μA Capacitance VR = 0 V, f = 1 MHz CO - 25 - pF Rthja - 1070 - K/W VCE = 10 V ICEO - 10 200 nA VCE = 5 V, f = 1 MHz CCE - 7 - pF Rthja - 500 - K/W SFH618A-2 VCEsat - 0.25 0.
PAGE 4
SFH618A, SFH6186 www.vishay.com Vishay Semiconductors VCC = 5 V Input pulse Input RL 5V 90 % VOUT Output pulse 10 % tr tf toff ton 22986 isfh618a_10 Fig. 2 - Test Circuit Fig.
PAGE 5
SFH618A, SFH6186 www.vishay.com Vishay Semiconductors 1.4 10 000 NCTR - Normalized CTR (sat) ICE0 - Leakage Current (nA) IF = 0 mA 1000 VCE = 40 V 100 10 VCE = 24 V 1 0.1 VCE = 12 V 0.01 0.001 VCE = 5.0 V 1.2 1.0 0.8 0.6 0.4 0.2 0 -60 -40 -20 0 20 40 60 Normalized to CTR value: IF = 1 mA, VCE = 5 V, Tamb = 25 °C -60 -40 -20 80 100 120 Tamb - Ambient Temperature (°C) IC - Collector Current (mA) 35 IF = 25 mA 25 20 IF = 1 mA IF = 10 mA IF = 0.5 mA IF = 5 mA 15 10 5 IF = 2 mA 0 0.
PAGE 6
SFH618A, SFH6186 www.vishay.com Vishay Semiconductors 1000 Tamb = 0 °C Tamb = -55 °C 2.0 1.5 Tamb = 25 °C 1.0 Tamb = 110 °C 0.5 Normalized to: IF = 1 mA, VCE = 5 V ton, toff - Switching Time (μs) NCTR - Normalized CTR (NS) 2.5 0.0 VCE = 5 V IF = 1 mA toff (μs) 100 ton (μs) 10 1 0.1 1 10 100 0 Fig. 12 - Current Transfer Ratio vs. Forward Current (non-sat.) 10 15 20 Fig. 15 - Switching Time vs.
PAGE 7
SFH618A, SFH6186 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS (in millimeters) 2 1 Pin one ID 6.48 6.81 ISO method A 3 4 4.55 4.83 7.62 typ. 0.79 typ. 0.76 1.14 1.27 typ. 3.30 3.81 2.79 3.30 0.508 0.89 0.46 0.56 i178027 5.84 6.35 10° 4° typ. 0° to 15° 0.2 0.3 1.27 2.54 SMD 0.76 Pin one ID R 0.25 2.54 1.78 6.48 6.81 1.52 8 min. 11.05 3 4 9.52 10.03 4.55 4.83 0.76 1.14 7.52 7.90 0.79 typ. 10° 3.30 3.81 0.25 typ. ISO method A 8 min. 0.249 0.102 4° typ. 2.54 typ.
PAGE 8
SFH618A, SFH6186 www.vishay.com Vishay Semiconductors PACKAGE MARKING (example of SFH618A-3X001) YWW 68 SFH618A-3 V Notes • VDE logo is only marked on option 1 parts • Tape and reel suffix (T) is not part of the package marking TAPE AND REEL PACKAGING (in millimeters) The tape is 16 mm and is wound on a 33 cm reel. There are 1000 parts per reel. Taped and reeled 4 pin optocouplers conform to EIA-481-2 and IEC60286-3. SMD-4 (“T”) Pin 1 and top of component 4 ± 0.1 1.5 min. 2 ± 0.
PAGE 9
SFH618A, SFH6186 www.vishay.com Vishay Semiconductors SOLDER PROFILES HANDLING AND STORAGE CONDITIONS ESD level: HBM class 2 Axis Title 300 10000 5s Floor life: unlimited Lead temperature 200 235 °C to 260 °C Wirst wave Moisture sensitivity level 1, according to J-STD-020 1000 ca. 2 K/s ca. 200 K/s 150 Conditions: Tamb < 30 °C, RH < 85 % Full line: typical Dotted lines: process limits Second wave 1st line 2nd line 2nd line Temperature (°C) 250 100 °C to 130 °C 100 100 2 K/s 50 ca.
PAGE 10
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.