Datasheet

SFH615A
www.vishay.com
Vishay Semiconductors
Rev. 1.4, 31-Aug-15
2
Document Number: 83433
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1)
Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through
hole devices (DIP).
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
ABSOLUTE MAXIMUM RATINGS (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
INPUT
Reverse voltage V
R
6V
DC forward current I
F
60 mA
Forward surge current t
p
≤ 10 μs I
FSM
2.5 A
LED power dissipation at 25 °C P
diss
70 mW
OUTPUT
Collector emitter voltage V
CEO
70 V
Emitter collector voltage V
ECO
7V
Collector current I
C
50 mA
Collector peak current t
p
/T = 0.5, t
p
≤ 10 ms I
CM
100 mA
Ouput power dissipation at 25 °C P
diss
150 mW
COUPLER
Operation temperature T
amb
-55 to +100 °C
Storage temperature range T
stg
-55 to +150 °C
Soldering temperature
(1)
2 mm from case, ≤ 10 s T
sld
260 °C
ELECTRICAL CHARACTERISTICS (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
INPUT
Forward voltage I
F
= 60 mA V
F
1.35 1.65 V
Reverse current V
R
= 6 V I
R
0.01 10 μA
Capacitance V
R
= 0 V, f = 1 MHz C
O
13 pF
OUTPUT
Collector emitter capacitance V
CE
= 5 V, f = 1 MHz C
CE
5.2 pF
Collector emitter leakage current V
CE
= 10 V
SFH615A-1 I
CEO
250nA
SFH615A-2 I
CEO
250nA
SFH615A-3 I
CEO
5 100 nA
SFH615A-4 I
CEO
5 100 nA
COUPLER
Collector emitter saturation voltage I
F
= 10 mA, f = 1 MHz V
CEsat
0.25 0.4 V
Coupling capacitance C
C
0.4 pF