Datasheet

ManualsBrandsVishay ManualsOpto- & Photo CouplersOptocoupler DIP-4 SMD 70V

SFH6156

www.vishay.com

Vishay Semiconductors

Rev. 2.8, 21-Apr-17

Document Number: 83671

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Optocoupler, Phototransistor Output, High Reliability, 5300 V

RMS

DESCRIPTION

The SFH6156 features a variety of transfer ratios, low

coupling capacitance and high isolation voltage. This

coupler has a GaAs infrared diode emitter, which is optically

coupled to a silicon planar phototransistor detector, and is

incorporated in a plastic SMD package.

The coupling devices are designed for signal transmission

between two electrically separated circuits.

FEATURES

• Excellent CTR linearity depending on forward

current

• Isolation test voltage, 5300 V

RMS

• Fast switching times

• Low CTR degradation

• Low coupling capacitance

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Switchmode power supply

• Telecom

• Battery powered equipment

AGENCY APPROVALS

The safety application model number covering all products

in this datasheet is SFH615A. This model number should be

used when consulting safety agency documents.

• UL1577, file no. E52744 system code H or J, double

protection

• DIN EN 60747-5-5 (VDE 0884-5) available with option 1

• cUL tested to CSA 22.2 bulletin 5A

• BSI IEC 60950, IEC 60065

• FIMKO EN6005, EN60950-1

• CQC G8898-2011

17448-5

ORDERING INFORMATION

SFH6156 - #X001T

PART NUMBER CTR

BIN

PACKAGE OPTION TAPE

AND

REEL

AGENCY CERTIFIED/PACKAGE

CTR (%)

10 mA

UL, cUL, BSI, FIMKO, CQC 40 to 80 63 to 125 100 to 200 160 to 320

SMD-4, 100 mil, pitch

SFH6156-1 SFH6156-2 SFH6156-3 SFH6156-4

SFH6156-1T SFH6156-2T SFH6156-3T SFH6156-4T

VDE, UL, cUL, BSI, FIMKO, CQC 40 to 80 63 to 125 100 to 200 160 to 320

SMD-4, 100 mil, pitch

SFH6156-1X001 SFH6156-2X001 SFH6156-3X001 -

SFH6156-1X001T SFH6156-2X001T SFH6156-3X001T SFH6156-4X001T

- - SFH6156-3X001T1 -

SMD-4

> 8 mm

Summary of content (9 pages)

PAGE 1
SFH6156 www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS FEATURES A 1 4 C • Excellent CTR linearity depending on forward current C 2 3 E • Isolation test voltage, 5300 VRMS • Fast switching times • Low CTR degradation 1 17448-5 • Low coupling capacitance • Material categorization: for definitions of compliance please see www.vishay.
PAGE 2
SFH6156 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V DC forward current IF 60 mA IFSM 2.
PAGE 3
SFH6156 www.vishay.com Vishay Semiconductors THERMAL CHARACTERISTICS PARAMETER SYMBOL VALUE UNIT LED power dissipation Pdiss 100 mW Output power dissipation Pdiss 150 mW Maximum LED junction temperature Tjmax. 125 °C Maximum output die junction temperature Tjmax.
PAGE 4
SFH6156 www.vishay.com Vishay Semiconductors CURRENT TRANSFER RATIO PARAMETER TEST CONDITION IF = 10 mA, VCE = 5 V IC/IF IF = 1 mA, VCE = 5 V PART SYMBOL MIN. TYP. MAX.
PAGE 5
SFH6156 www.vishay.
PAGE 6
SFH6156 www.vishay.com Vishay Semiconductors 104 1.2 25° 50° 75° D=0 0.005 0.01 0.02 0.05 0.1 103 tp IF T T VF (V) 102 1.0 0.2 0.5 DC 0.9 tp IF (mA) 1.1 D= Pulse cycle D = parameter 1 10 10- 1 100 101 10- 5 102 10- 3 Fig. 6 - Diode Forward Voltage (typ.) vs. Forward Current 10- 2 10- 1 100 101 tp (s) isfh615a_07 IF (mA) isfh615a_05 10- 4 Fig. 8 - Permissible Pulse Handling Capability Forward Current vs.
PAGE 7
SFH6156 www.vishay.com Vishay Semiconductors PACKAGE MARKING (example of SFH6156-2X001T) YWW Y 68 SFH6156-2 V Notes • VDE logo is only marked on option 1 parts • Tape and reel suffix (T) is not part of the package marking TAPE AND REEL PACKAGING (in millimeters) The tape is 16 mm and is wound on a 33 cm reel. There are 1000 parts per reel. Taped and reeled 4 pin optocouplers conform to EIA-481-2 and IEC60286-3. SMD-4 (“T”) Pin 1 and top of component 4 ± 0.1 1.5 min. 2 ± 0.
PAGE 8
SFH6156 www.vishay.com Vishay Semiconductors SOLDER PROFILES HANDLING AND STORAGE CONDITIONS ESD level: HBM class 2 300 255 °C 240 °C 217 °C 250 Temperature (°C) max. 260 °C 245 °C Floor life: unlimited Conditions: Tamb < 30 °C, RH < 85 % Moisture sensitivity level 1, according to J-STD-020 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp down 6 °C/s 50 max. ramp up 3 °C/s 0 0 19841 50 100 150 200 250 300 Time (s) Fig.
PAGE 9
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.