Datasheet

ManualsBrandsVISHAY ManualsOptoelectronics & DisplaysOptocoupler DIP-4 Type (misc.) Phototransistor/Single

SFH610A

i179056

SFH6106

SFH610A / SFH6106

Document Number 83666

Rev. 1.9, 23-Mar-06

Vishay Semiconductors

www.vishay.com

Optocoupler, Phototransistor Output, High Reliability, 5300 V

RMS

Features

• Good CTR Linearity Depending on

Forward Current

• Isolation Test Voltage, 5300 V

RMS

• High Collector-Emitter Voltage,

CEO

= 70 V

• Low Saturation Voltage

• Fast Switching Times

• Low CTR Degradation

• Temperature Stable

• Low Coupling Capacitance

• End-Stackable, 0.100" (2.54 mm) Spacing

• High Common-Mode Interference Immunity

• Lead (Pb)-free component

• Component in accordance to RoHS 2002/95/EC

and WEEE 2002/96/EC

Agency Approvals

• UL1577, File No. E52744 System Code H or J,

Double Protection

• DIN EN 60747-5-2 (VDE0884)

DIN EN 60747-5-5 pending

Available with Option 1

• CSA 93751

• BSI IEC60950 IEC60065

Description

The SFH610A (DIP) and SFH6106 (SMD) feature a

high current transfer ratio, low coupling capacitance

and high isolation voltage. These couplers have a

GaAs infrared diode emitter, which is optically cou-

pled to a silicon planar phototransistor detector, and

is incorporated in a plastic DIP-4 or SMD package.

The coupling devices are designed for signal trans-

mission between two electrically separated circuits.

The couplers are end-stackable with 2.54 mm spac-

ing.

Creepage and clearance distances of > 8.0 mm are

achieved with option 6. This version complies with

IEC 60950 (DIN VDE 0805) for reinforced insulation

up to an operation voltage of 400 V

RMS

or DC. Spec-

ifications subject to change.

Order Information

For additional information on the available options refer to

Option Information.

Part Remarks

SFH610A-1 CTR 40 - 80 %, DIP-4

SFH610A-2 CTR 63 - 125 %, DIP-4

SFH610A-3 CTR 100 - 200 %, DIP-4

SFH610A-4 CTR 160 - 320 %, DIP-4

SFH610A-5 CTR 250 - 500 %, DIP-4

SFH6106-1 CTR 40 - 80 %, SMD-4

SFH6106-2 CTR 63 - 125 %, SMD-4

SFH6106-3 CTR 100 - 200 %, SMD-4

SFH6106-4 CTR 160 - 320 %, SMD-4

SFH6106-5T CTR 250 - 500 %, SMD-4, tape and reel

SFH610A-1X006 CTR 40 - 80 %, DIP-4 400 mil

SFH610A-1X018T CTR 40 - 80 %, SMD-4, wide leadspread

SFH610A-2X006 CTR 63 - 125 %, DIP-4 400 mil

SFH610A-3X006 CTR 100 - 200 %, DIP-4 400 mil

SFH610A-3X007 CTR 100 - 200 %, SMD-4

SFH610A-4X006 CTR 160 - 320 %, DIP-4 400 mil

Summary of content (10 pages)

PAGE 1
SFH610A / SFH6106 Vishay Semiconductors Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS Features • Good CTR Linearity Depending on Forward Current • Isolation Test Voltage, 5300 VRMS e3 • High Collector-Emitter Voltage, VCEO = 70 V • Low Saturation Voltage • Fast Switching Times • Low CTR Degradation • Temperature Stable • Low Coupling Capacitance • End-Stackable, 0.100" (2.
PAGE 2
SFH610A / SFH6106 Vishay Semiconductors Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Rating for extended periods of the time can adversely affect reliability. Input Symbol Value Reverse voltage Parameter VR 6.
PAGE 3
SFH610A / SFH6106 Vishay Semiconductors Electrical Characteristics Tamb = 25 °C, unless otherwise specified Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. Input Typ. Max Forward voltage Parameter IF = 60 mA Test condition VF 1.25 1.65 V Reverse current VR = 6.0 V IR 0.01 10 µA Capacitance VR = 0 V, f = 1.
PAGE 4
SFH610A / SFH6106 Vishay Semiconductors Current Transfer Ratio Parameter Test condition IC/IF IF = 10 mA, VCE = 5.0 V IF = 1.0 mA, VCE = 5.0 V Part Symbol Min Max Unit SFH610A-1 SFH6106-1 CTR 40 Typ.
PAGE 5
SFH610A / SFH6106 Vishay Semiconductors Typical Characteristics Tamb = 25 °C, unless otherwise specified RL = 75 Ω IF VCC = 5 V IC 47 Ω isfh610a_04 isfh610a_01 Figure 1. Linear Operation ( without Saturation) Figure 4. Output Characteristics (typ.) Collector Current vs. Collector-Emitter Voltage VF = f (IF) 1.0 kΩ IF VCC = 5 V 47 Ω isfh610a_02 isfh610a_05 Figure 2. Switching Operation (with Saturation) Figure 5. Diode Forward Voltage vs. Forward Current f = 1.0 MHz IF = 10 mA, VCC = 5.
PAGE 6
SFH610A / SFH6106 Vishay Semiconductors Pulse cycle D = parameter, isfh610a_07 Figure 7. Permissible Pulse Handling Capability Forward Current vs. Pulse Width Ptot = f (TA) isfh610a_08 Figure 8. Permissible Power Dissipation vs. Temperature isfh610a_09 Figure 9. Permissible Diode Forward Current vs. Ambient Temperature www.vishay.com 6 Document Number 83666 Rev. 1.
PAGE 7
SFH610A / SFH6106 Vishay Semiconductors Package Dimensions in Inches (mm) 0.268 (6.81) 0.255 (6.48) PIN 1 IDENTIFICATION 0.190 (4.83) 0.179 (4.55) 0.312 (7.92) 0.296 (7.52) ISO Method A 10° 0.033 (0.84) 0.029 (0.74) 0.045 (1.14) 0.030 (0.76) 0.150 (3.81) 0.130 (3.30) 4° typ. 0.250(6.35) 0.230(5.84) 0.130 (3.30) 0.110 (2.79) 0.035(0.89) 0.020(0.51) 3°–9° 0.052 (1.32) 0.048 (1.22) 0.012 (0.30) 0.008 (0.20) 0.105 (2.67) 0.095 (2.41) i178027-1 Package Dimensions in Inches (mm) SMD 0.268(6.81) 0.
PAGE 8
SFH610A / SFH6106 Vishay Semiconductors Option 6 Option 7 0.407 (10.36) 0.391 (9.96) 0.307 (7.8) 0.291 (7.4) 0.300 (7.62) TYP. 0.028 (0.7) MIN. 0.400 (10.16) 0.430 (10.92) www.vishay.com 8 0.300 (7.62) TYP. 0.180 (4.6) 0.160 (4.1) 0.315 (8.0) MIN. 0.014 (0.35) 0.010 (0.25) Option 8 0.331 (8.4) MIN. 0.406 (10.3) MAX. 0.020 (0.50) 0.000 (0.00) 0.150 (3.81) 0.130 (3.30) 0.365 (9.27) MIN. 0.472 (12.00) MAX. 18487 Document Number 83666 Rev. 1.
PAGE 9
SFH610A / SFH6106 Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment.
PAGE 10
Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.