Datasheet

ManualsBrandsVishay ManualsOpto- & Photo CouplersOptocoupler DIP-6 70 V

VISHAY

SFH600

Document Number 83662

Rev. 1.4, 26-Oct-04

Vishay Semiconductors

www.vishay.com

i179004i179004

Pb-free

Optocoupler, Phototransistor Output, With Base Connection

Features

• Isolation Test Voltage (1.0 s), 5300 V

RMS

•V

CEsat

= 0.25 (≤ 0.4) V, I

= 10 mA, I

= 2.5 mA

• Built to conform to VDE Requirements

• High Quality Premium Device

• Long Term Stability

• Storage Temperature, - 55 °C to + 150 °C

• Lead-free component

• Component in accordance to RoHS 2002/95/EC

and WEEE 2002/96/EC

Agency Approvals

• UL1577, File No. E52744 System Code H or J,

Double Protection

• DIN EN 60747-5-2 (VDE0884)

DIN EN 60747-5-5 pending

Available with Option 1

• CSA 93751

• BSI IEC60950 IEC60065

Description

The SFH600 is an optocoupler with a GaAs LED emit-

ter which is optically coupled with a silicon planar pho-

totransistor detector. The component is packaged in

a plastic plug-in case, 20 AB DIN 41866.

The coupler transmits signals between two electri-

cally isolated circuits. The potential difference

between the circuits to be coupled should not exceed

the maximum permissible insulating voltage.

Order Information

For additional information on the available options refer to

Option Information.

Absolute Maximum Ratings

amb

= 25 °C, unless otherwise specified

Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is

not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute

Maximum Rating for extended periods of the time can adversely affect reliability.

Input

Part Remarks

SFH600-0 CTR 40 - 80 %, DIP-6

SFH600-1 CTR 63 - 125 %, DIP-6

SFH600-2 CTR 100 - 200 %, DIP-6

SFH600-3 CTR 160 - 320 %, DIP-6

SFH600-0X007 CTR 40 - 80 %, SMD-6 (option 7)

SFH600-1X007 CTR 63 - 125 %, SMD-6 (option 7)

SFH600-1X009 CTR 63 - 125 %, SMD-6 (option 9)

SFH600-2X006 CTR 100 - 200 %, DIP-6 400 mil (option 6)

SFH600-2X007 CTR 100 - 200 %, SMD-6 (option 7)

SFH600-3X006 CTR 160 - 320 %, DIP-6 400 mil (option 6)

SFH600-3X007 CTR 160 - 320 %, SMD-6 (option 7)

Parameter Test condition Symbol Value Unit

Reverse voltage V

6.0 V

DC forward current I

60 mA

Surge forward current t

= 10 µsI

FSM

2.5 A

Total power dissipation P

diss

100 mW

Summary of content (10 pages)

PAGE 1
SFH600 VISHAY Vishay Semiconductors Optocoupler, Phototransistor Output, With Base Connection Features • • • • • • • • Isolation Test Voltage (1.0 s), 5300 VRMS VCEsat = 0.25 (≤ 0.4) V, IF = 10 mA, IC = 2.
PAGE 2
SFH600 VISHAY Vishay Semiconductors Output Symbol Value Unit Collector-emitter voltage Parameter Test condition VCE 70 V Emitter-base voltage VEB 7.0 V IC 50 mA IC 100 mA Pdiss 150 mW Symbol Value Unit VISO 5300 VRMS Collector current t = 1.0 ms Power dissipation Coupler Parameter Isolation test voltage (between emitter and detector referred to climate DIN 40046, part2, Nov. 74) Test condition t = 1.0 s Creepage ≥ 7.0 mm Clearance ≥ 7.
PAGE 3
SFH600 VISHAY Vishay Semiconductors Coupler Parameter Test condition Symbol IF = 10 mA, IC = 2.5 mA Saturation voltage collectoremitter voltage Min VCEsat Capacitance (input-output) Typ. Max Unit 0.25 0.4 V 0.6 pF CIO Current Transfer Ratio Parameter Test condition IC/IF at VCE = 5.0 V IF = 10 mA IF = 1.0 mA VCE = 10 V Collector-emitter leakage current Part Symbol Min Max Unit SFH600-0 CTR 40 Typ.
PAGE 4
SFH600 VISHAY Vishay Semiconductors Typical Characteristics (Tamb = 25 °C unless otherwise specified) (TA = 0°C, VCE = 5.0 V) IC/IF = f (IF) IF RL = 75 Ω IC VCC = 5 V 0 1 2 3 47 Ω isfh600_01 isfh600_04 Figure 1. Linear Operation ( without Saturation) Figure 4. Current Transfer Ratio vs. Diode Current (VCE = 5.0 V) IC/IF = f (IF) IF 1 KΩ VCC = 5 V 0 1 2 3 47 Ω isfh600_02 isfh600_05 Figure 2. Switching Operation (with Saturation) Figure 5. Current Transfer Ratio vs.
PAGE 5
SFH600 VISHAY Vishay Semiconductors DC Pulsbetrieb Pulse DC Pulsbetrieb Pulse (TA = 75°C, VCE = 5.0 V) IC/IF = f (IF) IC = f (VCE) isfh600_07 isfh600_10 Figure 10. Output Characteristics SFH600-2, -3 Figure 7. Current Transfer Ratio vs. Diode Current DC Pulsbetrieb Pulse VF = f (IF) (IF = 10 mA, VCE = 5.0 V) IC/IF = f (T) isfh600_11 isfh600_08 Figure 11. Forward Voltage Figure 8. Current Transfer Ratio (CTR) vs.
PAGE 6
SFH600 VISHAY Vishay Semiconductors V VCEsat = f (IC) VCEsat VCEsat = f (IC) mA isfh600_13 isfh600_16 Figure 13. Saturation Voltage vs. Collector Current and Modulation Depth SFH600-0 Figure 16. Saturation Voltage vs. Collector Current and Modulation Depth SFH600-3 V VCEsat = f (IC) VCEsat VCEsat = f (IC) mA isfh600_14 isfh600_16 Figure 14. Saturation Voltage vs. Collector Current and Modulation Depth SFH600-1 Figure 17.
PAGE 7
SFH600 VISHAY Vishay Semiconductors Ptot = f (TA) C = f (VO) (f = 1.0 MHz) isfh600_19 isfh600_20 Figure 19. Permissible Forward Current Diode Figure 20. Transistor Capacitance Package Dimensions in Inches (mm) 3 2 1 4 5 6 pin one ID .248 (6.30) .256 (6.50) ISO Method A .335 (8.50) .343 (8.70) .039 (1.00) Min. 4° typ. .018 (0.45) .022 (0.55) .300 (7.62) typ. .048 (0.45) .022 (0.55) .130 (3.30) .150 (3.81) 18° .031 (0.80) min. .031 (0.80) .035 (0.90) .100 (2.54) typ. 3°–9° .114 (2.90) .
PAGE 8
SFH600 VISHAY Vishay Semiconductors Option 6 Option 7 .407 (10.36) .391 (9.96) .307 (7.8) .291 (7.4) .300 (7.62) TYP. Option 9 .375 (9.53) .395 (10.03) .300 (7.62) ref. .028 (0.7) MIN. .180 (4.6) .160 (4.1) .0040 (.102) .0098 (.249) .315 (8.0) MIN. .014 (0.35) .010 (0.25) .400 (10.16) .430 (10.92) www.vishay.com 8 .331 (8.4) MIN. .406 (10.3) MAX. .012 (.30) typ. .020 (.51) .040 (1.02) .315 (8.00) min. 15° max. 18450 Document Number 83662 Rev. 1.
PAGE 9
SFH600 VISHAY Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment.
PAGE 10
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.