Datasheet

RCV e3
www.vishay.com
Vishay Draloric
Revision: 31-Jan-17
4
Document Number: 20054
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
All tests are carried out in accordance with the following specifications:
• EN 60115-1, generic specification
• EN 140400, sectional specification
• EN 140401-802, detail specification
• IEC 60068-2-x, environmental test procedures
4.25.3 -
Endurance at upper
category temperature
155 °C; 1000 h ± (1 % R + 0.05 )± (2 % R + 0.05 )
4.40 -
Electrostatic
discharge
(human body model)
IEC 61340-3-1;
3 pos. + 3 neg. discharges;
ESD voltage acc. to style
± (1 % R + 0.05 )
4.29 45 (XA)
Component solvent
resistance
Isopropyl alcohol;
50 °C; method 2
No visible damage
4.30 45 (XA)
Solvent resistance
of marking
Isopropyl alcohol;
50 °C; method 1, toothbrush
Marking legible, no visible damage
4.22 6 (Fc)
Vibration, endurance
by sweeping
f = 10 Hz to 2000 Hz;
x, y, z  1.5 mm;
A  200 m/s
2
;
10 sweeps per axis
± (0.25 % R + 0.05 ) ± (0.5 % R + 0.05 )
4.37 -
Periodic electric
overload
U =
 2 x U
max.;
0.1 s on; 2.5 s off;
1000 cycles
± (1 % R + 0.05 )
4.27 -
Single pulse high
voltage overload,
10 μs/700 μs
Û = 10 x
 2 x U
max.;
10 pulses
± (1 % R + 0.05 )
TEST PROCEDURES AND REQUIREMENTS
EN 60115-1
CLAUSE
IEC 60068-2
TEST METHOD
TEST
PROCEDURE
REQUIREMENTS
PERMISSIBLE CHANGE (R)
Stability for product types:
100 k to 10 M
RCV e3
15 x P
70
x R
P
70
x R