Datasheet

RCG e3
www.vishay.com
Vishay Draloric
Revision: 01-Sep-14
1
Document Number: 20047
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Green Thick Film Chip Resistors
FEATURES
• Green resistor - does not use RoHS exemptions
• Stability R/R = 1 % for 1000 h at 70 ° C
• 2 mm pitch packaging option for 0603 size
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
Notes
• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
• Marking: See datasheet “Surface Mount Resistor Marking” (document number 20020).
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material.
Note
(1)
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded.
STANDARD ELECTRICAL SPECIFICATIONS
TYPE
CASE
SIZE
IMPERIAL
CASE
SIZE
METRIC
POWER RATING
P
70
W
LIMITING
ELEMENT
VOLTAGE
U
max.
AC
RMS
/DC
V
TEMPERATURE
COEFFICIENT
± ppm/K
TOLERANCE
± %
RESISTANCE
RANGE

SERIES
RCG0402 0402 RR1005M
0.063 50
100
0.5, 1
150 to 10M
E24; E96
150 1.0 to 147
200 5 1.0 to 10M E24
Zero-Ohm-Resistor: R
max.
= 20 m, I
max.
= 1.5 A
RCG0603 0603 RR1608M
0.1 75
100 0.5, 1
1.0 to 10M
E24; E96
200 5 E24
Zero-Ohm-Resistor: R
max.
= 20 m, I
max.
= 2.0 A
RCG0805 0805 RR2012M
0.125 150
100 0.5, 1
1.0 to 10M
E24; E96
200 5 E24
Zero-Ohm-Resistor: R
max.
= 20 m, I
max.
= 2.5 A
RCG1206 1206 RR3216M
0.25 200
100 0.5, 1
1.0 to 10M
E24; E96
200 5 E24
Zero-Ohm-Resistor: R
max.
= 20 m, I
max.
= 3.5 A
TECHNICAL SPECIFICATIONS
PARAMETER UNIT RCG0402 RCG0603 RCG0805 RCG1206
Rated dissipation P
70
(1)
W 0.063 0.1 0.125 0.25
Operating voltage U
max.
AC
RMS
/DC V 50 75 150 200
Insulation voltage U
ins
(1 min) V 75 100 200 300
Insulation resistance  > 10
9
Operating temperature range °C - 55 to + 155
Mass mg 0.65 2 5.5 10