Datasheet

NTCLE100E3
www.vishay.com
Vishay BCcomponents
Revision: 24-Aug-12
16
Document Number: 29049
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
REEL SPECIFICATIONS
CHARACTERISTICS OF TAPED PRODUCTS
Minimum pull-out force of the component: 5 N
Minimum peel-off force of adhesive tape: 6 N
Minimum tearing force tape: 15 N
Minimum pull-off force of tape-reel: 5 N
STORAGE CONDITIONS
Storage temperature range: - 25 °C to + 40 °C
Maximum relative humidity: 80 %, non-condensing
TESTS AND REQUIREMENTS
Essentially all tests are carried out in accordance with “IEC publication 60 068-2; Environmental testing”, except where indicated.
Notes
(1)
For R
25
 100 k the drift requirement is R/R < 5 %
(2)
For R
25
from 2.2 k to 10 k, requirement is ± 2 % max.
22.5
16
+1
-
0
77 85.6 92
356
max.
18
3
42 ±1
56 max.
Dimensions of the reel
CODE NUMBERS AND RELEVANT
PARAMETER Quantity
BULK NTCLE100E3....B0 500
TAPE AND REEL
1E PITCH
(1)
NTCLE100E3....T1
1500 per reel,
2 reels per box
TAPE AND REEL
2E PITCH
(1)
NTCLE100E3....T2
1500 per reel,
2 reels per box
STABILITY TESTS
CECC 32 100
CLAUSE
IEC 60068-2
TEST METHOD
TEST PROCEDURE REQUIREMENTS
D3; 4.20.1 Endurance 25 °C; 1000 h R/R < 1 %
1 Endurance - 40 °C; 1000 h R/R < 1 %
539 Endurance 500 mW; 55 °C; 1000 h R/R < 3 %
(1)
2 Dry heat, (steady state) 125 °C; 1000 h R/R < 3 %
D1; 4.19 3 Damp heat (steady state) 56 days at 40 °C; 90 % to 95 % RH R/R < 3 %
C2; 4.14 14 Rapid change of temperature - 40 °C to + 125 °C; 50 cycles R/R < 2 %
Other applicable tests
21
Robustness of leads:
Tensile strength
Bending
Loading force 10 N
Loading force 5 N
R/R  1 %
58
Soldering:
Solderability
Resistance to heat
240 °C max.; duration 4 s max.
265 °C max.; duration 5 s max.
R/R  1 %
(2)
27 Impact Free fall; 1 m R/R  1 %
29 Shock 490 m/s; half sinewave R/R  1 %
45
Resistance to solvent
(isopropanol)
Ambient temp for 5 minutes;
5 N with hydrophylic cotton wool
No traces of lacquer
on cotton wool
6Vibration
1.5 mm peak to peak: 10 Hz to 58 Hz
10 gp: 50 Hz to 500 Hz 1 octave/min. 2 h in
each direction in three orthogonal directions
No visible damage
R/R < 1 %
60695-2-2 Inflammability 1980, needle flame test Non-flammable