Datasheet

MLV0805E3
www.vishay.com
Vishay BCcomponents
Revision: 22-Apr-15
1
Document Number: 29109
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMD 0805 Multilayer Varistor
FEATURES
• Surface mount multilayer surge suppressor
• Inherent bidirectional clamping
• Excellent energy/volume ratio
• Suitable for reflow soldering
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
Over-voltage and transient voltage protection:
• Data lines and I/O port protection
• Protection against ESD transients
• On-board protection of IC’s and transistors
• Modem protection
• LCD protection
DESCRIPTION
Size 0805 (2012M) multilayer chip varistor with NiSn
terminations.
PACKAGING
Available in 8 mm paper tape, component pitch 4 mm on
180 mm reels containing 4000 pieces.
Notes
• Sinusoidal voltage assumed as normal operating condition.
If a non-sinusoidal voltage is present, the crest voltage x 0.707 should be used for type selection.
• Breakdown voltage at a current of 1 mA, measured according to 4.5 of IEC 61051-1.
• Parts are not recommended for automotive applications.
QUICK REFERENCE DATA
PARAMETER VALUE UNIT
Maximum continuous voltage
DC 5.6 to 30.0 V
AC 4.0 to 25.0 V
Maximum clamping voltage
at 1 A
15.5 to 65 V
Capacitance range
(at 1 MHz)
80 to 860 pF
Maximum energy (10/1000 μs) 0.1 J
Maximum peak current 30 to 40 A
Operating temperature range -55 to 125 °C
Weight ± 0.011 g
ELECTRICAL DATA AND ORDERING INFORMATION
WORKING VOLTAGE
BREAKDOWN
VOLTAGE
MAXIMUM
CLAMPING
VOLTAGE
MAXIMUM
PEAK CURRENT
TYPICAL
CAPACITANCE
PART NUMBER
V
RMS
V
DC
V
b
V
C
I
P
CSAP
V V V V A pF MLV0805E3
< 10 μA 1 mA 1 A, 8/20 μs 8/20 μs 1 MHz
4.0 5.6 7.1 to 9.3 15.5 40 860 0403T
7.0 9.0 11.0 to 14.0 20.0 40 585 0703T
11.0 14.0 16.5 to 20.3 30.0 40 280 1103T
25.0 30.0 37.0 to 46.0 65.0 30 80 2503T