Datasheet

ManualsBrandsVishay ManualsPassive ComponentsProfessional Metal Film Leaded Resistor (Jumper) 0Ohm 600mW

MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional

www.vishay.com

Vishay Beyschlag

Revision: 11-Jul-2018

Document Number: 28766

For technical questions, contact: filmresistorsleaded@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DESCRIPTION

Production is strictly controlled and follows an extensive

set of instructions established for reproducibility. A

homogeneous film of metal alloy is deposited on a high

grade ceramic body and conditioned to achieve the desired

temperature coefficient. Plated steel termination caps are

firmly pressed on the metallized rods. A special laser is used

to achieve the target value by smoothly cutting a helical

groove in the resistive layer without damaging the ceramics.

Connecting wires of electrolytic copper plated with 100 %

pure tin are welded to the termination caps. Alternative

termination wires available e.g. weldable wire (MBA/SMA

0204 only). The resistor elements are covered by a light blue

protective coating designed for electrical, mechanical and

climatic protection. Four or five color code rings designate

the resistance value and tolerance in accordance with IEC

60062.

The result of the determined production is verified by an

extensive testing procedure performed on 100 % of the

individual resistors. Only accepted products are stuck

directly on the adhesive tapes in accordance with

IEC 60286-1 or for the radial versions in accordance to

IEC 60286-2.

MATERIALS

Vishay acknowledges the following systems for the

regulation of hazardous substances:

• IEC 62474, Material Declaration for Products of and for the

Electrotechnical Industry, with the list of declarable

substances given therein

(1)

• The Global Automotive Declarable Substance List

(GADSL)

(2)

• The REACH regulation (1907/2006/EC) and the related list

of substances with very high concern (SVHC)

(3)

for its

supply chain

The products do not contain any of the banned substances

as per IEC 62474, GADSL, or the SVHC list, see

www.vishay.com/how/leadfree

.

Hence the products fully comply with the following

directives:

• 2000/53/EC End-of-Life Vehicle Directive (ELV) and

Annex II (ELV II)

• 2011/65/EU Restriction of the Use of Hazardous

Substances Directive (RoHS) with amendment

2015/863/EU

• 2012/19/EU Waste Electrical and Electronic Equipment

Directive (WEEE)

Vishay pursues the elimination of conflict minerals from its

supply chain, see the Conflict Minerals Policy at

www.vishay.com/doc?49037

ASSEMBLY

The resistors are suitable for processing on automatic

insertion equipment and cutting and bending machines.

Excellent solderability is proven, even after extended

storage. They are suitable for automatic soldering using

wave or dipping.

The resistors are completely lead (Pb)-free, the pure tin

plating provides compatibility with lead (Pb)-free and

lead-containing soldering processes. The immunity of the

plating against tin whisker growth, in compliance with

IEC 60068-2-82, has been proven under extensive testing.

The encapsulant is resistant to cleaning solvent specified in

IEC 60115-1

(3)

. The suitability of conformal coatings, if

applied, shall be qualified by appropriate means to ensure

the long-term stability of the whole system.

All products comply with GADSL

(1)

and the IEC 62474

(2)

list

of legal restrictions on hazardous substances. This includes

full compliance with the following directives:

• 2000/53/EC End of Vehicle Life Directive (ELV) and

Annex II (ELVII)

• 2011/65/EU Restriction of the use of Hazardous

Substances Directive (RoHS)

• 2012/19/EU Waste Electrical and Electrical Equipment

Directive (WEEE)

APPROVALS

The resistors (CECC version) are approved within the

IECQ-CECC Quality Assessment System for Electronic

Components to the detail specification EN 140101-806

which refers to EN 60115-1 and EN 140100 and the variety

of environmental test procedures of the IEC 60068

series. Conformity is attested by the use of the CECC logo

( ) as the Mark of Conformity on the package label for the

CECC version.

Vishay Beyschlag has achieved “Approval of

Manufacturer” in accordance with IEC QC 001002-3,

clause 2. The release certificate for “Technology Approval

Schedule” in accordance with CECC 240001 based on

IEC QC 001002-3, clause 6 is granted for the Vishay

Beyschlag manufacturing process.