Datasheet

ManualsBrandsVISHAY ManualsFETsIRFPC60PBF, MOSFET

Document Number: 91245 www.vishay.com

S11-0442-Rev. B, 14-Mar-11 1

This datasheet is subject to change without notice.

THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

Power MOSFET

IRFPC60, SiHFPC60

Vishay Siliconix

FEATURES

• Dynamic dV/dt Rating

• Repetitive Avalanche Rated

• Isolated Central Mounting Hole

•Fast Switching

• Ease of Paralleling

• Simple Drive Requirements

• Compliant to RoHS Directive 2002/95/EC

DESCRIPTION

Third generation Power MOSFETs from Vishay provide the

designer with the best combination of fast switching,

ruggedized device design, low on-resistance and

cost-effectiveness.

The TO-247AC package is preferred for

commercial-industrial applications where higher power levels

preclude the use of TO-220AB devices. The TO-247AC is

similar but superior to the earlier TO-218 package because of

its isolated mounting hole. It also provides greater creepage

distance between pins to meet the requirements of most

safety specifications.

Notes

a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11).

b. V

= 50 V, starting T

= 25 °C, L = 7.2 mH, R

= 25 Ω, I

= 16 A (see fig. 12).

c. I

≤ 16 A, dI/dt ≤ 140 A/μs, V

≤ V

, T

≤ 150 °C.

d. 1.6 mm from case.

PRODUCT SUMMARY

(V) 600

DS(on)

(Ω)V

= 10 V 0.40

(Max.) (nC) 210

(nC) 26

(nC) 110

Configuration Single

N-Channel MOSFET

TO-247AC

Available

RoHS*

COMPLIANT

ORDERING INFORMATION

Package TO-247AC

Lead (Pb)-free

IRFPC60PbF

SiHFPC60-E3

SnPb

IRFPC60

SiHFPC60

ABSOLUTE MAXIMUM RATINGS (T

= 25 °C, unless otherwise noted)

PARAMETER SYMBOL LIMIT UNIT

Drain-Source Voltage V

600

Gate-Source Voltage V

± 20

Continuous Drain Current V

at 10 V

= 25 °C

= 100 °C 10

Pulsed Drain Current

Linear Derating Factor 2.2 W/°C

Single Pulse Avalanche Energy

1000 mJ

Repetitive Avalanche Current

16 A

Repetitive Avalanche Energy

28 mJ

Maximum Power Dissipation T

= 25 °C P

280 W

Peak Diode Recovery dV/dt

dV/dt 3.0 V/ns

Operating Junction and Storage Temperature Range T

, T

stg

- 55 to + 150

°C

Soldering Recommendations (Peak Temperature) for 10 s 300

Mounting Torque 6-32 or M3 screw

10 lbf · in

1.1 N · m

* Pb containing terminations are not RoHS compliant, exemptions may apply

Summary of content (9 pages)

PAGE 1
IRFPC60, SiHFPC60 Vishay Siliconix Power MOSFET FEATURES PRODUCT SUMMARY VDS (V) • • • • • • • 600 RDS(on) (Ω) VGS = 10 V 0.40 Qg (Max.) (nC) 210 Qgs (nC) 26 Qgd (nC) 110 Configuration Single D COMPLIANT Third generation Power MOSFETs from Vishay provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness.
PAGE 2
IRFPC60, SiHFPC60 Vishay Siliconix THERMAL RESISTANCE RATINGS PARAMETER SYMBOL TYP. MAX. Maximum Junction-to-Ambient RthJA - 40 Case-to-Sink, Flat, Greased Surface RthCS 0.24 - Maximum Junction-to-Case (Drain) RthJC - 0.45 UNIT °C/W SPECIFICATIONS (TJ = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT VDS VGS = 0 V, ID = 250 μA 600 - - V ΔVDS/TJ Reference to 25 °C, ID = 1 mA - 830 - mV/°C VGS(th) VDS = VGS, ID = 250 μA 2.0 - 4.
PAGE 3
IRFPC60, SiHFPC60 Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Fig. 1 - Typical Output Characteristics, TC = 25 °C Fig. 2 - Typical Output Characteristics, TC = 150 °C Document Number: 91245 S11-0442-Rev. B, 14-Mar-11 Fig. 3 - Typical Transfer Characteristics Fig. 4 - Normalized On-Resistance vs. Temperature www.vishay.com 3 This datasheet is subject to change without notice.
PAGE 4
IRFPC60, SiHFPC60 Vishay Siliconix Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage www.vishay.com 4 Fig. 7 - Typical Source-Drain Diode Forward Voltage Fig. 8 - Maximum Safe Operating Area Document Number: 91245 S11-0442-Rev. B, 14-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.
PAGE 5
IRFPC60, SiHFPC60 Vishay Siliconix VDS VGS RD D.U.T. RG + - VDD 10 V Pulse width ≤ 1 µs Duty factor ≤ 0.1 % Fig. 10a - Switching Time Test Circuit VDS 90 % 10 % VGS td(on) Fig. 9 - Maximum Drain Current vs. Case Temperature tr td(off) tf Fig. 10b - Switching Time Waveforms Fig. 11 - Maximum Effective Transient Thermal Impedance, Junction-to-Case Document Number: 91245 S11-0442-Rev. B, 14-Mar-11 www.vishay.com 5 This datasheet is subject to change without notice.
PAGE 6
IRFPC60, SiHFPC60 Vishay Siliconix L Vary tp to obtain required IAS VDS VDS tp VDD D.U.T RG + - IAS V DD VDS 10 V 0.01 Ω tp Fig. 12a - Unclamped Inductive Test Circuit IAS Fig. 12b - Unclamped Inductive Waveforms Fig. 12c - Maximum Avalanche Energy vs. Drain Current Current regulator Same type as D.U.T. 50 kΩ QG 10 V 12 V 0.2 µF 0.3 µF QGS QGD + D.U.T. VG - VDS VGS 3 mA Charge IG ID Current sampling resistors Fig. 13a - Basic Gate Charge Waveform www.vishay.com 6 Fig.
PAGE 7
IRFPC60, SiHFPC60 Vishay Siliconix Peak Diode Recovery dV/dt Test Circuit + D.U.T. Circuit layout considerations • Low stray inductance • Ground plane • Low leakage inductance current transformer + - - Rg • • • • + dV/dt controlled by Rg Driver same type as D.U.T. ISD controlled by duty factor “D” D.U.T. - device under test + - VDD Driver gate drive P.W. Period D= P.W. Period VGS = 10 Va D.U.T. lSD waveform Reverse recovery current Body diode forward current dI/dt D.U.T.
PAGE 8
Package Information www.vishay.com Vishay Siliconix TO-247AC (High Voltage) A A 4 E B 3 R/2 E/2 7 ØP Ø k M DBM A2 S (Datum B) ØP1 A D2 Q 4 4 2xR (2) D1 D 1 2 4 D 3 Thermal pad 5 L1 C L A See view B 2 x b2 3xb 0.10 M C A M 4 E1 0.01 M D B M View A - A C 2x e A1 b4 Planting Lead Assignments 1. Gate 2. Drain 3. Source 4. Drain D DE (b1, b3, b5) Base metal E C (c) C c1 (b, b2, b4) (4) Section C - C, D - D, E - E View B MILLIMETERS DIM. MIN. MAX. A 4.58 5.31 A1 2.21 2.
PAGE 9
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.