Datasheet

ManualsBrandsVISHAY ManualsFETsIRFPC60LCPBF, MOSFET

Document Number: 91244 www.vishay.com

S11-0443-Rev. B, 14-Mar-11 1

This datasheet is subject to change without notice.

THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

Power MOSFET

IRFPC60LC, SiHFPC60LC

Vishay Siliconix

FEATURES

• Ultra Low Gate Charge

• Reduced Gate Drive Requirement

• Enhanced 30 V V

Rating

• Reduced C

iss

, C

oss

, C

rss

• Isolated Central Mounting Hole

• Dynamic dV/dt Rated

• Repetitive Avalanche Rated

• Compliant to RoHS Directive 2002/95/EC

DESCRIPTION

This new series of low charge Power MOSFETs achieve

significantly lower gate charge over conventional MOSFETs.

Utilizing advanced Power MOSFETs technology the device

improvements allow for reduced gate drive requirements,

faster switching speeds and increased total system savings.

These device improvements combined with the proven

ruggedness and reliability of Power MOSFETs offer the

designer a new standart in power transistors for switching

applications.

The TO-247AC package is preferred for

commercial-industrial applications where higher power levels

preclude the use of TO-220AB devices. The TO-247AC is

similar but superior to the earlier TO-218 package because of

its isolated mounting hole.

Notes

a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11).

b. V

= 25 V, starting T

= 25 °C, L = 7.2 mH, R

= 25 Ω, I

= 16 A (see fig. 12).

c. I

≤ 16 A, dI/dt ≤ 140 A/μs, V

≤ V

, T

≤ 150 °C.

d. 1.6 mm from case.

PRODUCT SUMMARY

(V) 600

DS(on)

(Ω)V

= 10 V 0.40

(Max.) (nC) 120

(nC) 29

(nC) 48

Configuration Single

N-Channel MOSFET

TO-247AC

Available

RoHS*

COMPLIANT

ORDERING INFORMATION

Package TO-247AC

Lead (Pb)-free

IRFPC60LCPbF

SiHFPC60LC-E3

SnPb

IRFPC60LC

SiHFPC60LC

ABSOLUTE MAXIMUM RATINGS (T

= 25 °C, unless otherwise noted)

PARAMETER SYMBOL LIMIT UNIT

Drain-Source Voltage V

600

Gate-Source Voltage V

± 30

Continuous Drain Current V

at 10 V

= 25 °C

= 100 °C 10

Pulsed Drain Current

Linear Derating Factor 2.2 W/°C

Single Pulse Avalanche Energy

1000 mJ

Repetitive Avalanche Current

16 A

Repetitive Avalanche Energy

28 mJ

Maximum Power Dissipation T

= 25 °C P

280 W

Peak Diode Recovery dV/dt

dV/dt 3.0 V/ns

Operating Junction and Storage Temperature Range T

, T

stg

- 55 to + 150

°C

Soldering Recommendations (Peak Temperature) for 10 s 300

Mounting Torque 6-32 or M3 screw

10 lbf · in

1.1 N · m

* Pb containing terminations are not RoHS compliant, exemptions may apply

Summary of content (9 pages)

PAGE 1
IRFPC60LC, SiHFPC60LC Vishay Siliconix Power MOSFET FEATURES PRODUCT SUMMARY VDS (V) • • • • • • • • 600 RDS(on) (Ω) VGS = 10 V Qg (Max.) (nC) 0.40 120 Qgs (nC) 29 Qgd (nC) 48 Configuration Single Available RoHS* COMPLIANT DESCRIPTION D This new series of low charge Power MOSFETs achieve significantly lower gate charge over conventional MOSFETs.
PAGE 2
IRFPC60LC, SiHFPC60LC Vishay Siliconix THERMAL RESISTANCE RATINGS PARAMETER SYMBOL TYP. MAX. Maximum Junction-to-Ambient RthJA - 40 Case-to-Sink, Flat, Greased Surface RthCS 0.24 - Maximum Junction-to-Case (Drain) RthJC - 0.45 UNIT °C/W SPECIFICATIONS (TJ = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX.
PAGE 3
IRFPC60LC, SiHFPC60LC Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Fig. 1 - Typical Output Characteristics, TC = 25 °C Fig. 2 -Typical Output Characteristics, TC = 150 °C Document Number: 91244 S11-0443-Rev. B, 14-Mar-11 Fig. 3 - Typical Transfer Characteristics Fig. 4 - Normalized On-Resistance vs. Temperature www.vishay.com 3 This datasheet is subject to change without notice.
PAGE 4
IRFPC60LC, SiHFPC60LC Vishay Siliconix Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage Fig. 7 - Typical Source-Drain Diode Forward Voltage Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage Fig. 8 - Maximum Safe Operating Area www.vishay.com 4 Document Number: 91244 S11-0443-Rev. B, 14-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.
PAGE 5
IRFPC60LC, SiHFPC60LC Vishay Siliconix RD VDS VGS D.U.T. RG + - VDD 10 V Pulse width ≤ 1 µs Duty factor ≤ 0.1 % Fig. 10a - Switching Time Test Circuit VDS 90 % Fig. 9 - Maximum Drain Current vs. Case Temperature 10 % VGS td(on) td(off) tf tr Fig. 10b - Switching Time Waveforms Fig. 11 - Maximum Effective Transient Thermal Impedance, Junction-to-Case L Vary tp to obtain required IAS VDS VDS tp VDD D.U.T RG + - I AS V DD VDS 10 V tp 0.01 Ω Fig.
PAGE 6
IRFPC60LC, SiHFPC60LC Vishay Siliconix Fig. 12c - Maximum Avalanche Energy vs. Drain Current Current regulator Same type as D.U.T. QG 10 V 50 kΩ 0.2 µF 12 V 0.3 µF QGS QGD + D.U.T. VG - VDS VGS 3 mA Charge IG ID Current sampling resistors Fig. 13a - Basic Gate Charge Waveform www.vishay.com 6 Fig. 13b - Gate Charge Test Document Number: 91244 S11-0443-Rev. B, 14-Mar-11 This datasheet is subject to change without notice.
PAGE 7
IRFPC60LC, SiHFPC60LC Vishay Siliconix Peak Diode Recovery dV/dt Test Circuit + D.U.T. Circuit layout considerations • Low stray inductance • Ground plane • Low leakage inductance current transformer + - - Rg • • • • + dV/dt controlled by Rg Driver same type as D.U.T. ISD controlled by duty factor “D” D.U.T. - device under test + - VDD Driver gate drive P.W. Period D= P.W. Period VGS = 10 Va D.U.T. lSD waveform Reverse recovery current Body diode forward current dI/dt D.U.T.
PAGE 8
Package Information www.vishay.com Vishay Siliconix TO-247AC (High Voltage) A A 4 E B 3 R/2 E/2 7 ØP Ø k M DBM A2 S (Datum B) ØP1 A D2 Q 4 4 2xR (2) D1 D 1 2 4 D 3 Thermal pad 5 L1 C L A See view B 2 x b2 3xb 0.10 M C A M 4 E1 0.01 M D B M View A - A C 2x e A1 b4 Planting Lead Assignments 1. Gate 2. Drain 3. Source 4. Drain D DE (b1, b3, b5) Base metal E C (c) C c1 (b, b2, b4) (4) Section C - C, D - D, E - E View B MILLIMETERS DIM. MIN. MAX. A 4.58 5.31 A1 2.21 2.
PAGE 9
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.