Datasheet

ManualsBrandsVISHAY ManualsFETsIRFP9140PBF, MOSFET

Document Number: 91238 www.vishay.com

S11-0444-Rev. B, 14-Mar-11 1

This datasheet is subject to change without notice.

THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

Power MOSFET

IRFP9140, SiHFP9140

Vishay Siliconix

FEATURES

• Dynamic dV/dt Rating

• Repetitive Avalanche Rated

• P-Channel

• Isolated Central Mounting Hole

• 175 °C Operating Temperature

•Fast Switching

• Ease of Paralleling

• Compliant to RoHS Directive 2002/95/EC

DESCRIPTION

Third generation Power MOSFETs from Vishay provide the

designer with the best combination of fast switching,

ruggedized device design, low on-resistance and

cost-effectiveness.

The TO-247AC package is preferred for

commercial-industrial applications where higher power

levels preclude the use of TO-220AB devices. The

TO-247AC is similar but superior to the earlier TO-218

package because of its isolated mouting hole. It also

provides greater creepage distance between pins to meet

the requirements of most safety specifications.

Notes

a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11).

b. V

= - 25 V, starting T

= 25 °C, L = 3.3 mH, R

= 25 Ω, I

= - 21 A (see fig. 12).

c. I

≤ - 21 A, dI/dt ≤ 200 A/μs, V

≤ V

, T

≤ 175 °C.

d. 1.6 mm from case.

PRODUCT SUMMARY

(V) - 100

DS(on)

(Ω)V

= - 10 V 0.20

(Max.) (nC) 61

(nC) 14

(nC) 29

Configuration Single

P-Channel MOSFET

TO-247AC

Available

RoHS*

COMPLIANT

ORDERING INFORMATION

Package TO-247AC

Lead (Pb)-free

IRFP9140PbF

SiHFP9140-E3

SnPb

IRFP9140

SiHFP9140

ABSOLUTE MAXIMUM RATINGS (T

= 25 °C, unless otherwise noted)

PARAMETER SYMBOL LIMIT UNIT

Drain-Source Voltage V

- 100

Gate-Source Voltage V

± 20

Continuous Drain Current V

at - 10 V

= 25 °C

- 21

= 100 °C - 15

Pulsed Drain Current

- 84

Linear Derating Factor 1.2 W/°C

Single Pulse Avalanche Energy

960 mJ

Repetitive Avalanche Current

- 21 A

Repetitive Avalanche Energy

18 mJ

Maximum Power Dissipation T

= 25 °C P

180 W

Peak Diode Recovery dV/dt

dV/dt - 5.5 V/ns

Operating Junction and Storage Temperature Range T

, T

stg

- 55 to + 175

°C

Soldering Recommendations (Peak Temperature) for 10 s 300

Mounting Torque 6-32 or M3 screw

10 lbf · in

1.1 N · m

* Pb containing terminations are not RoHS compliant, exemptions may apply

Summary of content (9 pages)

PAGE 1
IRFP9140, SiHFP9140 Vishay Siliconix Power MOSFET FEATURES PRODUCT SUMMARY VDS (V) • • • • • • • • - 100 RDS(on) (Ω) VGS = - 10 V Qg (Max.) (nC) 0.
PAGE 2
IRFP9140, SiHFP9140 Vishay Siliconix THERMAL RESISTANCE RATINGS PARAMETER SYMBOL TYP. MAX. Maximum Junction-to-Ambient RthJA - 40 Case-to-Sink, Flat, Greased Surface RthCS 0.24 - Maximum Junction-to-Case (Drain) RthJC - 0.83 UNIT °C/W SPECIFICATIONS (TJ = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX.
PAGE 3
IRFP9140, SiHFP9140 Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Fig. 1 - Typical Output Characteristics, TC = 25 °C Fig. 3 - Typical Transfer Characteristics Fig. 2 - Typical Output Characteristics, TC = 175 °C Fig. 4 - Normalized On-Resistance vs. Temperature Document Number: 91238 S11-0444-Rev. B, 14-Mar-11 www.vishay.com 3 This datasheet is subject to change without notice.
PAGE 4
IRFP9140, SiHFP9140 Vishay Siliconix Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage Fig. 7 - Typical Source-Drain Diode Forward Voltage Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage Fig. 8 - Maximum Safe Operating Area www.vishay.com 4 Document Number: 91238 S11-0444-Rev. B, 14-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.
PAGE 5
IRFP9140, SiHFP9140 Vishay Siliconix RD VDS VGS D.U.T. RG +VDD - 10 V Pulse width ≤ 1 µs Duty factor ≤ 0.1 % Fig. 10a - Switching Time Test Circuit td(on) tr td(off) tf VGS 10 % 90 % VDS Fig. 9 - Maximum Drain Current vs. Case Temperature Fig. 10b - Switching Time Waveforms Fig. 11 - Maximum Effective Transient Thermal Impedance, Junction-to-Case Document Number: 91238 S11-0444-Rev. B, 14-Mar-11 www.vishay.com 5 This datasheet is subject to change without notice.
PAGE 6
IRFP9140, SiHFP9140 Vishay Siliconix L Vary tp to obtain required IAS IAS VDS VDS D.U.T RG + V DD VDD IAS tp - 10 V 0.01 Ω tp VDS Fig. 12a - Unclamped Inductive Test Circuit Fig. 12b - Unclamped Inductive Waveforms Fig. 12c - Maximum Avalanche Energy vs. Drain Current Current regulator Same type as D.U.T. 50 kΩ QG - 10 V 12 V 0.2 µF 0.3 µF QGS - QGD D.U.T. VG + VDS VGS - 3 mA Charge IG ID Current sampling resistors Fig. 13a - Basic Gate Charge Waveform www.vishay.com 6 Fig.
PAGE 7
IRFP9140, SiHFP9140 Vishay Siliconix Peak Diode Recovery dV/dt Test Circuit D.U.T. + Circuit layout considerations • Low stray inductance • Ground plane • Low leakage inductance current transformer + - - Rg + • dV/dt controlled by Rg • ISD controlled by duty factor “D” • D.U.T. - device under test + - VDD Note • Compliment N-Channel of D.U.T. for driver Driver gate drive P.W. Period D= P.W. Period VGS = - 10 Va D.U.T. lSD waveform Reverse recovery current Body diode forward current dI/dt D.
PAGE 8
Package Information www.vishay.com Vishay Siliconix TO-247AC (High Voltage) A A 4 E B 3 R/2 E/2 7 ØP Ø k M DBM A2 S (Datum B) ØP1 A D2 Q 4 4 2xR (2) D1 D 1 2 4 D 3 Thermal pad 5 L1 C L A See view B 2 x b2 3xb 0.10 M C A M 4 E1 0.01 M D B M View A - A C 2x e A1 b4 Planting Lead Assignments 1. Gate 2. Drain 3. Source 4. Drain D DE (b1, b3, b5) Base metal E C (c) C c1 (b, b2, b4) (4) Section C - C, D - D, E - E View B MILLIMETERS DIM. MIN. MAX. A 4.58 5.31 A1 2.21 2.
PAGE 9
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.