Datasheet

ManualsBrandsVISHAY ManualsFETsIRFP22N50APBF, MOSFET N channel 22A 500V

Document Number: 91207 www.vishay.com

S11-0446-Rev. C, 14-Mar-11 1

This datasheet is subject to change without notice.

THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

Power MOSFET

IRFP22N50A, SiHFP22N50A

Vishay Siliconix

FEATURES

• Low Gate Charge Q

Results in Simple Drive

Requirement

• Improved Gate, Avalanche and Dynamic dV/dt

Ruggedness

• Fully Characterized Capacitance and Avalanche Voltage

and Current

• Compliant to RoHS Directive 2002/95/EC

APPLICATIONS

• Switch Mode Power Supply (SMPS)

• Uninterruptable Power Supply

• High Speed Power Switching

TYPICAL SMPS TOPOLOGIES

• Full Bridge Converters

• Power Factor Correction Boost

Notes

a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11).

b. Starting T

= 25 °C, L = 4.87 mH, R

= 25 , I

= 22 A (see fig. 12).

c. I

 22 A, dI/dt  190 A/µs, V

 V

, T

 150 °C.

d. 1.6 mm from case.

PRODUCT SUMMARY

(V) 500

DS(on)

()V

= 10 V 0.23

(Max.) (nC) 120

(nC) 32

(nC) 52

Configuration Single

N-Channel MOSFET

TO-247AC

Available

RoHS*

COMPLIANT

ORDERING INFORMATION

Package TO-247AC

Lead (Pb)-free

IRFP22N50APbF

SiHFP22N50A-E3

SnPb

IRFP22N50A

SiHFP22N50A

ABSOLUTE MAXIMUM RATINGS (T

= 25 °C, unless otherwise noted)

PARAMETER SYMBOL LIMIT UNIT

Drain-Source Voltage V

500

Gate-Source Voltage V

± 30

Continuous Drain Current V

at 10 V

= 25 °C

= 100 °C 14

Pulsed Drain Current

Linear Derating Factor 2.2 W/°C

Single Pulse Avalanche Energy

1180 mJ

Repetitive Avalanche Current

22 A

Repetitive Avalanche Energy

28 mJ

Maximum Power Dissipation T

= 25 °C P

277 W

Peak Diode Recovery dV/dt

dV/dt 4.8 V/ns

Operating Junction and Storage Temperature Range T

, T

stg

- 55 to + 150

°C

Soldering Recommendations (Peak Temperature) for 10 s 300

Mounting Torque 6-32 or M3 screw

10 lbf · in

1.1 N · m

* Pb containing terminations are not RoHS compliant, exemptions may apply

Summary of content (9 pages)

PAGE 1
IRFP22N50A, SiHFP22N50A Vishay Siliconix Power MOSFET FEATURES PRODUCT SUMMARY VDS (V) • Low Gate Charge Qg Results in Simple Drive Requirement 500 RDS(on) () VGS = 10 V 0.23 Qg (Max.
PAGE 2
IRFP22N50A, SiHFP22N50A Vishay Siliconix THERMAL RESISTANCE RATINGS PARAMETER SYMBOL TYP. MAX. Maximum Junction-to-Ambient RthJA - 40 Case-to-Sink, Flat, Greased Surface RthCS 0.24 - Maximum Junction-to-Case (Drain) RthJC - 0.45 UNIT °C/W SPECIFICATIONS (TJ = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT VDS VGS = 0 V, ID = 250 µA 500 - - V VDS/TJ Reference to 25 °C, ID = 1 mA - 0.55 - V/°C VGS(th) VDS = VGS, ID = 250 µA 2.
PAGE 3
IRFP22N50A, SiHFP22N50A Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Fig. 1 - Typical Output Characteristics Fig. 2 - Typical Output Characteristics Document Number: 91207 S11-0446-Rev. C, 14-Mar-11 Fig. 3 - Typical Transfer Characteristics Fig. 4 - Normalized On-Resistance vs. Temperature www.vishay.com 3 This datasheet is subject to change without notice.
PAGE 4
IRFP22N50A, SiHFP22N50A Vishay Siliconix Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage www.vishay.com 4 Fig. 7 - Typical Source-Drain Diode Forward Voltage Fig. 8 - Maximum Safe Operating Area Document Number: 91207 S11-0446-Rev. C, 14-Mar-11 This datasheet is subject to change without notice.
PAGE 5
IRFP22N50A, SiHFP22N50A Vishay Siliconix RD VDS VGS D.U.T. RG + - VDD 10 V Pulse width ≤ 1 µs Duty factor ≤ 0.1 % Fig. 10a - Switching Time Test Circuit VDS 90 % 10 % VGS td(on) Fig. 9 - Maximum Drain Current vs. Case Temperature td(off) tf tr Fig. 10b - Switching Time Waveforms Fig. 11 - Maximum Effective Transient Thermal Impedance, Junction-to-Case VDS L Vary tp to obtain required IAS VDS tp VDD D.U.T RG + - IAS V DD A VDS 10 V tp 0.01 Ω Fig.
PAGE 6
IRFP22N50A, SiHFP22N50A Vishay Siliconix Fig. 12c - Maximum Avalanche Energy vs. Drain Current Fig. 12d - Typical Drain-to-Source Voltage vs. Avalanche Current Current regulator Same type as D.U.T. 50 kΩ QG 10 V 12 V 0.2 µF 0.3 µF QGS QGD + D.U.T. VG - VDS VGS 3 mA Charge IG ID Current sampling resistors Fig. 13a - Basic Gate Charge Waveform www.vishay.com 6 Fig. 13b - Gate Charge Test Circuit Document Number: 91207 S11-0446-Rev.
PAGE 7
IRFP22N50A, SiHFP22N50A Vishay Siliconix Peak Diode Recovery dV/dt Test Circuit + Circuit layout considerations • Low stray inductance • Ground plane • Low leakage inductance current transformer D.U.T. + - - Rg • • • • + dV/dt controlled by Rg Driver same type as D.U.T. ISD controlled by duty factor “D” D.U.T. - device under test + - VDD Driver gate drive P.W. Period D= P.W. Period VGS = 10 Va D.U.T. lSD waveform Reverse recovery current Body diode forward current dI/dt D.U.T.
PAGE 8
Package Information www.vishay.com Vishay Siliconix TO-247AC (High Voltage) A A 4 E B 3 R/2 E/2 7 ØP Ø k M DBM A2 S (Datum B) ØP1 A D2 Q 4 4 2xR (2) D1 D 1 2 4 D 3 Thermal pad 5 L1 C L A See view B 2 x b2 3xb 0.10 M C A M 4 E1 0.01 M D B M View A - A C 2x e A1 b4 Planting Lead Assignments 1. Gate 2. Drain 3. Source 4. Drain D DE (b1, b3, b5) Base metal E C (c) C c1 (b, b2, b4) (4) Section C - C, D - D, E - E View B MILLIMETERS DIM. MIN. MAX. A 4.58 5.31 A1 2.21 2.
PAGE 9
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.