Datasheet

ILD205T, ILD206T, ILD207T, ILD211T, ILD213T
www.vishay.com
Vishay Semiconductors
Rev. 2.1, 23-Oct-15
7
Document Number: 83647
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TAPE AND REEL PACKAGING FOR DUAL CHANNELS
(1)
(in millimeters)
Selected dual SOIC8 optocouplers are available in tape and
reel format. To order surface mount ILD2XX optocoupler on
tape and reel, add a suffix “T” after the part number, i.e.,
ILD207T.
The tape is 16 mm and is wound on a 33 cm reel. There are
2000 parts per reel. Taped and reeled dual SOIC8
optocouplers conform to EIA-481-2 and IEC 60286-3.
Note
(1)
Select dual channel devices are available in the shorter SOIC-8
package and will be taped according to the single channel
taping specification

Fig. 14
SOLDER PROFILE
Fig. 15 - Lead (Pb)-free Reflow Solder Profile
according to J-STD-020
HANDLING AND STORAGE CONDITIONS
ESD level: HBM class 2
Floor life: unlimited
Conditions: T
amb
< 30 °C, RH < 85 %
Moisture sensitivity level 1, according to J-STD-020
1.5 (0.059)
1.75 ± 0.1
(0.069 ± 0.004)
13.3 (0.523)
0.3 (0.012) max.
0.1 (0.004) max.
16.0 ± 0.3
(0.630 ± 0.012)
18004
4 ± 0.1
(1.57 ± 0.004)
2 ± 0.05 (0.079 ± 0.002)
6.6 (0.26)
6.35 (0.25)
8.0 (0.315)
7.5 ± 0.05
(0.300 ± 0.002)
3.8 (0.15)
Embossment
Direction of feed
Center lines
of cavity
10 pitch cumulative
tolerance on tape
± 0.2 (0.008)
1.5 (0.059) min.
Pin 1 and
top of component
Top
cover
tape
0
50
100
150
200
250
300
0 50 100 150 200 250 300
Time (s)
Temperature (°C)
240 °C
245 °C
max. 260 °C
max. 120 s
max. 100 s
217 °C
max. 30 s
max. ramp up 3 °C/s
max. ramp down 6 °C/s
19841
255 °C