Datasheet

ILD205T, ILD206T, ILD207T, ILD211T, ILD213T, ILD217T
www.vishay.com
Vishay Semiconductors
Rev. 1.9, 27-Jul-11
2
Document Number: 83647
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1)
Refer to reflow profile for soldering conditions for surface mounted devices.
Note
• Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering
evaluations. Typical values are for information only and are not part of the testing requirements.
OUTPUT
Collector emitter breakdown voltage BV
CEO
70 V
Emitter collector breakdown voltage BV
ECO
7V
Power dissipation per channel P
diss
125 mW
COUPLER
Isolation test voltage t = 1 s V
ISO
4000 V
RMS
Total package dissipation ambient
(2 LEDs and 2 detectors, 2 channels)
P
tot
350 mW
Storage temperature T
stg
- 55 to + 150 °C
Operating temperature T
amb
- 55 to + 100 °C
Soldering time from 260 °C
(1)
T
sld
10 s
ELECTRICAL CHARACTERISTICS (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
INPUT
Forward voltage I
F
= 10 mA V
F
1.2 1.55 V
Reverse current V
R
= 6 V I
R
0.1 100 μA
Capacitance V
R
= 0 V C
O
25 pF
OUTPUT
Collector emitter breakdown voltage I
C
= 10 μA BV
CEO
70 V
Emitter collector breakdown voltage I
E
= 10 μA BV
ECO
7V
Collector emitter leakage current V
CE
= 10 V, I
F
= 0 A I
CEO
550nA
Collector emitter capacitance V
CE
= 0 V C
CE
10 pF
COUPLER
Collector emitter saturation voltage I
F
= 10 mA, I
C
= 2.5 mA V
CEsat
0.4 V
Capacitance (input to output) C
IO
0.5 pF
Resistance (input to output) R
IO
100 G
CURRENT TRANSFER RATIO (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
DC current transfer ratio
V
CE
= 5 V, I
F
= 10 mA
ILD205T CTR
DC
40 80 %
ILD206T CTR
DC
63 125 %
ILD207T CTR
DC
100 200 %
ILD211T CTR
DC
20 %
ILD213T CTR
DC
100 %
V
CE
= 5 V, I
F
= 1 mA
ILD205T CTR
DC
13 30 %
ILD206T CTR
DC
22 45 %
ILD207T CTR
DC
34 70 %
ILD217T CTR
DC
100 120 %
ABSOLUTE MAXIMUM RATINGS (T
amb
= 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT