Datasheet

ManualsBrandsVISHAY ManualsOptoelectronics & DisplaysILD 2XX SMD Optocoupler Type (misc.) Phototransistor/Dual

ILD205T, ILD206T, ILD207T, ILD211T, ILD213T, ILD217T

www.vishay.com

Vishay Semiconductors

Rev. 1.9, 27-Jul-11

Document Number: 83647

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Optocoupler, Phototransistor Output, Dual Channel,

SOIC-8 Package

DESCRIPTION

The ILD205T, ILD206T, ILD207T, ILD211T, ILD213T,

ILD217T are optically coupled pairs with a gallium arsenide

infrared LED and a silicon NPN phototransistor. Signal

information, including a DC level, can be transmitted by the

device while maintaining a high degree of electrical isolation

between input and output. The ILD205T, ILD206T, ILD207T,

ILD211T, ILD213T, ILD217T come in a standard SOIC-8

small outline package for surface mounting which makes it

ideally suited for high density applications with limited

space. In addition to eliminating through-holes

requirements, this package conforms to standards for

surface mounted devices.

A specified minimum and maximum CTR allows a narrow

tolerance in the electrical design of the adjacent circuits. The

high BV

CEO

of 70 V gives a higher safety margin compared

to the industry standard of 30 V.

FEATURES

• Two channel coupler

• SOIC-8 surface mountable package

• Standard lead spacing of 0.05"

• Available only on tape and reel option

(conforms to EIA standard 481-2)

• Isolation test voltage, 4000 V

RMS

• Compatible with dual wave, vapor phase and IR reflow

soldering

• Compliant to RoHS Directive 2002/95/EC and in

accordance to WEEE 2002/96/EC

AGENCY APPROVALS

• UL1577, file no. E52744 system code Y

• cUL - file no. E52744, equivalent to CSA bulletin 5A

i179018-2

i179025

ORDERING INFORMATION

ILD2##T

PART NUMBER

AGENCY CERTIFIED/PACKAGE

CTR (%)

10 mA 1 mA

UL, cUL 40 to 80 63 to 125 100 to 200  20  100  100

SOIC-8 ILD205T ILD206T ILD207T ILD211T ILD213T ILD217T

ABSOLUTE MAXIMUM RATINGS (T

amb

= 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

INPUT

Peak reverse voltage V

Peak pulsed current 1 μs, 300 pps 1 A

Continuous forward current per channel I

30 mA

Power dissipation P

diss

50 mW

SIOC-8

6.1 mm

Summary of content (7 pages)

PAGE 1
ILD205T, ILD206T, ILD207T, ILD211T, ILD213T, ILD217T www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package FEATURES A1 8C • Two channel coupler C2 7E • SOIC-8 surface mountable package A3 6C • Standard lead spacing of 0.
PAGE 2
ILD205T, ILD206T, ILD207T, ILD211T, ILD213T, ILD217T www.vishay.
PAGE 3
ILD205T, ILD206T, ILD207T, ILD211T, ILD213T, ILD217T www.vishay.com Vishay Semiconductors SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL Delay time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 1) MIN TYP. MAX UNIT td 3 μs Rise time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 1) tr 3 μs Fall time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 1) tf 4.7 μs Storage time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 1) ts 0.
PAGE 4
ILD205T, ILD206T, ILD207T, ILD211T, ILD213T, ILD217T www.vishay.com Vishay Semiconductors SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL MIN. TYP. Climatic classification (according to IEC 68 part 1) MAX. UNIT 55/100/21 Comparative tracking index CTI 175 VIOTM 6000 VIORM 560 399 V V PSO 350 mW ISI 150 mA TSI 165 °C Creepage distance 4 mm Clearance distance 4 mm Insulation thickness 0.2 mm Note • As per IEC 60747-5-2, §7.4.3.8.
PAGE 5
ILD205T, ILD206T, ILD207T, ILD211T, ILD213T, ILD217T www.vishay.com Vishay Semiconductors 1.2 NCTR - Normalized CTR (sat) NCTR - Normalized CTR (sat) 1.2 1.0 IF = 5 mA 0.8 IF = 10 mA 0.6 IF = 1 mA 0.4 VCE = 0.4 V Normalized to: IF = 10 mA, VCE = 5 V, Tamb = 25 °C 0.2 0 - 60 - 40 - 20 0 20 40 60 0.8 0.4 Tamb = 25 °C 0.2 Tamb = 75 °C Tamb = 100 °C 0.1 100 Tamb - Ambient Temperature (°C) 10 100 Fig. 11 - Normalized CTR (sat) vs. Forward Current 1.
PAGE 6
ILD205T, ILD206T, ILD207T, ILD211T, ILD213T, ILD217T www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 3.05 ± 0.05 R 0.13 1.27 CL 6.10 0.36 3.91 ± 0.05 0.91 1.14 4.32 6.6 Pin one ID 0.41 7° 40° 0.38 ± 0.05 5.84 ± 0.05 1.49 ± 0.05 ISO method A 3.18 ± 0.05 5° max. 0.1 0.2 0.20 R 0.25 max. 1.27 typ. 1.02 0.51 ± 0.10 2 plcs. Lead coplanarity ± 0.001 max.
PAGE 7
Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.