Datasheet

Packaging Information
www.vishay.com
Vishay General Semiconductor
Revision: 18-Mar-14
4
Document Number: 88869
For technical questions within your region: [e-mail]
, [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
AXIAL-LEADED TAPE AND REEL PACKAGING
Note
• Package codes, 61/5A, 52/5B are matrix-frame constructions for T
RANSZORB
®
TVS in SMA and SMB only.
TABLE 2 - REEL AND AMMO PACK TAPING SPECIFICATIONS
COMPONENT 
CASE TYPE
PREFERRED
PACKAGE
CODE
UNITS
PER REEL
COMPONENT
PITCH
“A” Fig. 1
INSIDE TAPE
SPACING “B”
Fig. 1
REEL DIMENSION
“D” Fig. 2
LEAD BENDING
“E” Fig. 1
EA. INCHES mm INCHES mm INCHES mm INCHES mm
1.5KA (PAR) 54 1400 0.395 10.0 2.06 52.4 13.0 330 0.047 1.2
DO-204AC 54 4000 0.200 5.0 2.06 52.4 13.0 330 0.047 1.2
DO-201AD 54 1400 0.395 10.0 2.06 52.4 13.0 330 0.047 1.2
DO-204AL 54 5500 0.200 5.0 2.06 52.4 13.0 330 0.047 1.2
DFS Surface Mount 77 1500
Fig. 13
- - 13.0 330 Fig. 13 -
DO-214BA (GF1) 67A/5CA 1500/6500 - - 7.0/13.0 178/330 Fig. 13 -
DO-213AA (GL34) 98/83 2500/9000 - - 7.0/13.0 178/330 Fig. 13 -
DO-213AB (GL41) 96/97 1500/5000 - - 7.0/13.0 178/330 Fig. 13 -
GP10E Radial Fig. 7 and Fig. 8 2500 0.500 12.7 - - 13.0 330 0.079 2.0
GP10E 54 5500 0.200 5.0 2.06 52.4 13.0 330 0.047 1.2
GP20/1.5KE 54 1400 0.395 10.0 2.06 52.4 13.0 330 0.047 1.2
MPG06 100 5500 0.200 5.0 2.06 52.4 13.0 330 0.047 1.2
P600 54 800 0.395 10.0 2.06 52.4 13.0 330 0.047 1.2
DO-220AA (SMP) 84A/85A 3000/10 000
Fig. 13
- - 7.0/13.0 178/330 Fig. 13 -
SMPD I 14 000 - - 13.0 330 Fig. 13 -
MicroSMP/MicroSMF 89A/H 4500 - - 7.0 178 Fig. 13 -
TO-277A (SMPC) 86A/87A 1500/6500 - - 7.0/13.0 178/330 Fig. 13 -
DO-214AC (SMA)
61, 61T, TR/5A,
5AT, TR3
1800/7500 - - 7.0/13.0 178/330 Fig. 13 -
DO-214AA (SMB)/
DO-215AA (SMBG)
52, 52T/5B, 5BT 750/3200 - - 7.0/13.0 178/330 Fig. 13 -
DO-214AB (SMC)/
DO-215AB (SMCG)
57T/9AT 850/3500 - - 7.0/13.0 178/330 Fig. 13 -
DO-218AB 2D 750 - - 13.0 330 Fig. 13 -
TO-263AB 81, 8W 800 - - 13.0 330 Fig. 13 -
TO-269AA (MB-S) 80 3000 - - 13.0 330 Fig. 13 -
DO-221AC (SlimSMA) 6A/6B 3500/14 000 - - 7.0/13.0 178/330 Fig. 13 -
TABLE 3 - COMPONENT AND INSIDE HORIZONTAL TAPE SPACING
COMPONENT
BODY DIAMETER
COMPONENTS SPACING
A (LEAD TO LEAD)
INSIDE TAPE
SPACING "B"
CUMULATIVE
PITCH TOLERANCE
0 mm to 5 mm 
(0.0" to 0.197")
5.0 mm ± 0.5 mm
(0.197" ± 0.020")
26 mm + 1.5 mm/- 0.0 mm
(1.024" + 0.059"/- 0.0")
Not to exceed 1.5 mm (0.059")
over 6 consecutive components
0 mm to 5 mm 
(0.0" to 0.197")
5.0 mm ± 0.5 mm
(0.197" ± 0.020")
52.4 mm + 1.5 mm/- 0.4 mm
(2.062" + 0.059"/- 0.016")
5.01 mm to 10 mm 
(0.197" to 0.394")
10 mm ± 0.5 mm
(0.394" ± 0.020")
52.4 mm + 1.5 mm/- 0.4 mm
(2.062" + 0.059"/- 0.016")