Datasheet

ManualsBrandsVishay ManualsOpto- & Photo CouplersOptocoupler (TRIAC) 600 V 60 mA 5.3 kV DIP-6

Document Number: 83690 For technical questions, contact: optocouplers.answers@vishay.com

www.vishay.com

Rev. 1.5, 07-May-08 193

Optocoupler, Phototriac Output,

Zero Crossing

BRT21/BRT22/BRT23

Vishay Semiconductors

DESCRIPTION

The BRT21, BRT22, BRT23 product family consists of AC

switch optocouplers with zero voltage detectors with two

electrically insulated lateral power ICs which integrate a

thyrister system, a photo detector and noise suppression at

the output and an IR GaAs diode input.

High input sensitivity is achieved by using an emitter follower

phototransistor and a SCR predriver resulting in an LED

trigger current of less than 2 mA or 3 mA (DC). Inverse

parallel SCRs provide commutating dV/dt greater than

10 kV/µs.

The zero cross line voltage detection circuit consists of two

MOSFETS and a photodiode.

The BRT21/22/23 product family isolates low-voltage logic

from 120, 230, and 380 VAC lines to control resistive,

inductive or capacitive loads including motors, solenoids,

high current thyristers or TRIAC and relays.

FEATURES

• High input sensitivity I

= 1.0 mA

•I

TRMS

= 300 mA

• High static dV/dt 10 000 V/µs

• Electrically insulated between input and output

circuit

• Microcomputer compatible

• Trigger current

- (I

< 1.2 mA) BRT22F, BRT23F,

- (I

< 2 mA) BRT21H, BRT22H, BRT23H

- (I

< 3 mA) BRT21M, BRT22M, BRT23M

• Available surface mount and on on tape and reel

• Zero voltage crossing detector

• UL file E52744 system code J

• DIN EN 60747-5-5 available with option 1

• Lead (Pb)-free component

• Component in accordance to RoHS 2002/95/EC and

WEEE 2002/96/EC

APPLICATIONS

• Industrial controls

• Office equipment

• Consumer appliances

Note

For additional information on the available options refer to option information.

17223

MT2

MT1

*Zero Crossing Circuit

ZCC*

ORDER INFORMATION

PART REMARKS

BRT21H V

DRM

≤ 400 V, DIP-6, I

= 2.0 mA

BRT21M V

DRM

≤ 400 V, DIP-6, I

= 3.0 mA

BRT22F V

DRM

≤ 600 V, DIP-6, I

= 1.2 mA

BRT22H V

DRM

≤ 600 V, DIP-6, I

= 2.0 mA

BRT22M V

DRM

≤ 600 V, DIP-6, I

= 3.0 mA

BRT23F V

DRM

≤ 800 V, DIP-6, I

= 1.2 mA

BRT23H V

DRM

≤ 800 V, DIP-6, I

= 2.0 mA

BRT23M V

DRM

≤ 800 V, DIP-6, I

= 3.0 mA

BRT21H-X006 V

DRM

≤ 400 V, DIP-6 400 mil (option 6), I

= 2.0 mA

BRT21H-X007 V

DRM

≤ 400 V, SMD-6 (option 7), I

= 2.0 mA

BRT21M-X006 V

DRM

≤ 400 V, DIP-6 400 mil (option 6), I

= 3.0 mA

BRT22F-X006 V

DRM

≤ 600 V, SMD-6 (option 7), I

= 1.2 mA

BRT22H-X007 V

DRM

≤ 600 V, SMD-6 (option 7), I

= 2.0 mA

BRT22M-X006 V

DRM

≤ 600 V, DIP-6 400 mil (option 6), I

= 3.0 mA

BRT23F-X006 V

DRM

≤ 800 V, DIP-6 400 mil (option 6), I

= 1.2 mA

BRT23F-X007 V

DRM

≤ 800 V, DIP-6 400 mil (option 6), I

= 1.2 mA

BRT23H-X006 V

DRM

≤ 800 V, DIP-6 400 mil (option 6), I

= 2.0 mA

BRT23H-X007 V

DRM

≤ 800 V, SMD-6 (option 7), I

= 2.0 mA

BRT23M-X006 V

DRM

≤ 800 V, DIP-6 400 mil (option 6), I

= 3.0 mA

BRT23M-X007 V

DRM

≤ 800 V, SMD-6 (option 7), I

= 3.0 mA

Summary of content (9 pages)

PAGE 1
BRT21/BRT22/BRT23 Vishay Semiconductors Optocoupler, Phototriac Output, Zero Crossing FEATURES A 1 6 MT2 C 2 5 NC 3 17223 ZCC* NC 4 MT1 *Zero Crossing Circuit DESCRIPTION The BRT21, BRT22, BRT23 product family consists of AC switch optocouplers with zero voltage detectors with two electrically insulated lateral power ICs which integrate a thyrister system, a photo detector and noise suppression at the output and an IR GaAs diode input.
PAGE 2
BRT21/BRT22/BRT23 Vishay Semiconductors Optocoupler, Phototriac Output, Zero Crossing ABSOLUTE MAXIMUM RATINGS PARAMETER (1) TEST CONDITION PART SYMBOL VALUE UNIT VR 6.0 V IF 60 mA Surge current IFSM 2.5 A Power dissipation Pdiss INPUT Reverse voltage IR = 10 µA Forward current Derate from 25 °C 100 mW 1.33 mW/°C OUTPUT Peak off-state voltage ID(RMS) = 70 µA BRT21 VDM 400 V BRT22 VDM 600 V BRT23 VDM 800 V ITM 300 mA 3.
PAGE 3
BRT21/BRT22/BRT23 Optocoupler, Phototriac Output, Zero Crossing Vishay Semiconductors ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Off-state voltage ID(RMS) = 70 µA VD(RMS) 424 460 Repetitive peak off-state voltage IDRM = 100 µA VDRM 600 VD = VDRM, Tamb = 100 °C, IF = 0 mA ID(RMS) 10 On-state voltage IT = 300 mA VTM 1.7 3.0 V On-state current PF = 1.0, VT(RMS) = 1.7 V ITM 300 mA f = 50 Hz ITSM 3.
PAGE 4
BRT21/BRT22/BRT23 Vishay Semiconductors Optocoupler, Phototriac Output, Zero Crossing SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL MIN. TYP. Climatic classification (according to IEC 68 part 1) MAX.
PAGE 5
BRT21/BRT22/BRT23 Optocoupler, Phototriac Output, Zero Crossing Vishay Semiconductors TYPICAL CHARACTERISTICS Tamb = 25 °C, unless otherwise specified 150 IFth Normalized to IFth at PF = 1.0 Ta = 25 °C 1.8 LED - LED Power (mW) NIFth - Normalized LED Trigger Current 2.0 1.6 1.4 1.2 1.0 0.8 0.0 0.2 iil410_02 0.4 0.6 0.8 1.0 0 - 60 - 40 - 20 PF - Power Factor 0 20 40 60 80 100 Ta - Ambient Temperature (°C) iil410_05 Fig. 5 - Maximum LED Power Dissipation 103 1.4 5 1.
PAGE 6
BRT21/BRT22/BRT23 Vishay Semiconductors Optocoupler, Phototriac Output, Zero Crossing 0.6 400 40 to 60 Hz Line operation, Ptot = f(ITRMS) 0.5 Ptot (W) ITRMS (mA) 300 200 Thermocouple measurement must be performed potentially separated to A1 and A2. Measuring junction as near as possible at the case. 0 50 0.3 0.2 ITRMS = f(TPIN5), RthJ-PIN5 = 16.5 K/W 100 0.4 0.1 0 60 70 80 90 TPIN5 (°C) iil410_08 0 100 100 12 103 VDINH min.
PAGE 7
BRT21/BRT22/BRT23 Optocoupler, Phototriac Output, Zero Crossing Vishay Semiconductors 33 Ω 1 6 2 5 3 500 µH 220 V~ 22 nF 4 iil410_14 1 6 2 5 3 4 22 nF 220 V~ iil410_15 Fig. 14 - 2 - Connect a Series Resistor to the Output and Bridge Both by a Capacitor Fig. 15 - 3 - Connect a Choke of Low Winding Cap. in Series, e.g., a Ringcore Choke, with Higher Load Currents TECHNICAL INFORMATION See Application Note for additional information.
PAGE 8
BRT21/BRT22/BRT23 Vishay Semiconductors Optocoupler, Phototriac Output, Zero Crossing OZONE DEPLETING SUBSTANCES POLICY STATEMENT It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment.
PAGE 9
Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.