Datasheet

ManualsBrandsVISHAY ManualsDiodesDiode

Bulletin PD-20746 rev. D 03/03

= 18ns typ.

F(AV)

= 8Amp

= 600V

• Hyperfast Recovery Time

• Low Forward Voltage Drop

• Low Leakage Current

• 175°C Operating Junction Temperature

• UL E78996 approved

Features

Description/ Applications

Hyperfast Rectifier

State of the art Hyperfast recovery rectifiers designed with optimized performance of forward voltage drop,

Hyperfast recover time, and soft recovery.

The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness

and reliability characteristics.

These devices are intended for use in PFC Boost stage in the AC-DC section of SMPS, inverters or as freewheeling

diodes.

The IR extremely optimized stored charge and low recovery current minimize the switching losses and reduce over

dissipation in the switching element and snubbers.

www.irf.com

8ETH06

8ETH06S

8ETH06-1

8ETH06FP

8ETH06

TO-220AC

Case Styles

8ETH06S

PAK

8ETH06-1

TO-262

Anode

Base

Cathode

Anode

athode

Base

Cathode

Anode

N/C

8ETH06FP

TO-220 FULLPACK

Anode

athode

Absolute Maximum Ratings

RRM

Peak Repetitive Reverse Voltage 600 V

F(AV)

Average Rectified Forward Current@ T

= 144°C 8 A

@ T

= 118°C (FULLPACK)

FSM

Non Repetitive Peak Surge Current @ T

= 25°C 90

(FULLPACK) 100

Peak Repetitive Forward Current 16

STG

Operating Junction and Storage Temperatures - 65 to 175 °C

Parameters Max Units

Summary of content (9 pages)

PAGE 1
Bulletin PD-20746 rev. D 03/03 8ETH06 8ETH06S 8ETH06-1 8ETH06FP Hyperfast Rectifier Features • • • • • trr = 18ns typ. IF(AV) = 8Amp VR = 600V Hyperfast Recovery Time Low Forward Voltage Drop Low Leakage Current 175°C Operating Junction Temperature UL E78996 approved Description/ Applications State of the art Hyperfast recovery rectifiers designed with optimized performance of forward voltage drop, Hyperfast recover time, and soft recovery.
PAGE 2
8ETH06, 8ETH06S, 8ETH06-1, 8ETH06FP Bulletin PD-20746 rev. D 03/03 Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameters VBR, Vr Breakdown Voltage, Blocking Voltage VF Forward Voltage IR Min Typ Max Units Test Conditions 600 - - V IR = 100µA - 2.0 2.4 V IF = 8A, TJ = 25°C - 1.3 1.8 V IF = 8A, TJ = 150°C - 0.
PAGE 3
8ETH06, 8ETH06S, 8ETH06-1, 8ETH06FP Bulletin PD-20746 rev. D 03/03 00 1000 Reverse Current - I R (µA) 10 150˚C 125˚C 10 100˚C 1 0.1 25˚C 0.01 0.001 T = 175˚C J 0 T = 150˚C J 100 200 300 400 500 600 Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage T = 25˚C J 1000 Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) T J = 175˚C 100 1 0.
PAGE 4
8ETH06, 8ETH06S, 8ETH06-1, 8ETH06FP Bulletin PD-20746 rev. D 03/03 Thermal Impedance Z thJC (°C/W) 10 1 0.1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 PDM t1 t2 Single Pulse (Thermal Resistance) Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.01 0.00001 0.0001 0.001 0.01 0.1 1 t1, Rectangular Pulse Duration (Seconds) Fig. 5 - Max.
PAGE 5
8ETH06, 8ETH06S, 8ETH06-1, 8ETH06FP Bulletin PD-20746 rev. D 03/03 400 60 IF = 16 A IF = 8 A 350 V R = 390V T J = 125˚C T J = 25˚C 50 300 IF = 16 A IF = 8 A 250 trr ( ns ) Qrr ( nC ) 40 30 200 150 100 20 50 V R = 390V T J = 125˚C T J = 25˚C 10 100 0 100 1000 di F /dt (A/µs ) Fig. 9 - Typical Reverse Recovery vs. di F /dt 1000 di F /dt (A/µs ) Fig. 10 - Typical Stored Charge vs. di F /dt Reverse Recovery Circuit VR = 200V 0.01 Ω L = 70µH D.U.T.
PAGE 6
8ETH06, 8ETH06S, 8ETH06-1, 8ETH06FP Bulletin PD-20746 rev. D 03/03 3 trr IF tb ta 0 Q rr 2 I RRM 4 0.5 I RRM di(rec)M/dt 5 0.75 I RRM 1 diFf /dt 1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current 4. Qrr - Area under curve defined by t rr and IRRM t rr x I RRM Q rr = 2 5.
PAGE 7
8ETH06, 8ETH06S, 8ETH06-1, 8ETH06FP Bulletin PD-20746 rev. D 03/03 Outline Table 4.69 (0.18) 4.20 (0.16) 10.16 (0.40) REF. 1.32 (0.05) 1.22 (0.05) 6.47 (0.25) 15.49 (0.61) 93° 6.18 (0.24) 14.73 (0.58) 2.61 (0.10) 5.28 (0.21) 2.32 (0.09) 4.78 (0.19) REF. 1.40 (0.055) 1.14 (0.045) 2X 2 0.55 (0.02) 8.89 (0.35) 3X Base Cathode 0.46 (0.02) 0.93 (0.37) MINIMUM RECOMMENDED FOOTPRINT 0.69 (0.27) 11.43 (0.45) 3 1 Anode N/C 1 3 4.57 (0.18) 4.32 (0.17) 8.89 (0.35) 17.78 (0.70) 2 0.
PAGE 8
ETH06, 8ETH06S, 8ETH06-1, 8ETH06FP Bulletin PD-20746 rev. D 03/03 Outline Table 10.6 HOLE ø 3.4 10.4 3.1 1 3.2 Cathode 3 Anode 15.8 16.0 15.4 16.4 7.1 6.7 3.7 2.8 2.6 13.7 2.54 TYP. 0.9 0.7 2.54 TYP. 0.48 0.44 2.85 2.65 13.5 3.3 3.1 10° 1.15 1.4 1.05 TYP 1.3 R0.7 (2 PLACES) 4.8 4.6 R0.5 Conforms to JEDEC Outline TO-220 FULLPACK Dimensions in millimeters and (inches) 5°± 0.5° 5°± 0.
PAGE 9
8ETH06, 8ETH06S, 8ETH06-1, 8ETH06FP Bulletin PD-20746 rev. D 03/03 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 03/03 www.irf.