Datasheet

ManualsBrandsVISHAY ManualsDiodesDiode

8ETH03

8ETH03S

8ETH03-1

Bulletin PD-20023 rev. C 09/01

= 35ns

F(AV)

= 8Amp

= 300V

• Ultrafast Recovery Time

• Low Forward Voltage Drop

• Low Leakage Current

• 175°C Operating Junction Temperature

Features

Description/ Applications

Absolute Maximum Ratings

Ultrafast Rectifier

RRM

Repetitive Peak Reverse Voltage 300 V

F(AV)

Average Rectified Forward Current @ T

= 155°C 8 A

FSM

Non Repetitive Peak Surge Current @ T

= 25°C 100

STG

Operating Junction and Storage Temperatures - 65 to 175 °C

Parameters Max Units

International Rectifier's 300V series are the state of the art Ultrafast recovery rectifiers designed with optimized

performance of forward voltage drop and Ultrafast recovery time.

The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness

and reliability characteristics.

These devices are intended for use in the output rectification stage of SMPS, UPS, DC-DC converters as well as

freewheeling diodes in low voltage inverters and chopper motor drives.

Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over

dissipation in the switching element and snubbers.

www.irf.com

8ETH03

TO-220AC

Case Styles

8ETH03S

PAK

8ETH03-1

TO-262

Anode

Base

Cathode

Anode

athode

Base

Cathode

Anode

Summary of content (8 pages)

PAGE 1
Bulletin PD-20023 rev. C 09/01 8ETH03 8ETH03S 8ETH03-1 Ultrafast Rectifier Features • • • • trr = 35ns IF(AV) = 8Amp VR = 300V Ultrafast Recovery Time Low Forward Voltage Drop Low Leakage Current 175°C Operating Junction Temperature Description/ Applications International Rectifier's 300V series are the state of the art Ultrafast recovery rectifiers designed with optimized performance of forward voltage drop and Ultrafast recovery time.
PAGE 2
8ETH03, 8ETH03S, 8ETH03-1 Bulletin PD-20023 rev. C 09/01 Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameters VBR, Vr Breakdown Voltage, Blocking Voltage VF Forward Voltage IR Min Typ Max Units Test Conditions 300 Reverse Leakage Current - - V I R = 100µA - 1.0 1.25 V I F = 8A - 0.83 1.00 V I F = 8A, TJ = 125°C - 0.02 20 µA V R = VR Rated - 6.
PAGE 3
8ETH03, 8ETH03S, 8ETH03-1 Bulletin PD-20023 rev. C 09/01 Reverse Current - I R (µA) 1000 Tj = 175˚C 100 150˚C 10 125˚C 100˚C 1 0.1 25˚C 0.01 0.001 0 50 100 150 200 250 300 Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage 10 1000 Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) 100 Tj = 175˚C Tj = 125˚C Tj = 25˚C 1 0.4 T J = 25˚C 100 10 0.6 0.8 1 1.2 1.4 1.6 1.8 2 0 Forward Voltage Drop - VFM (V) Fig.
PAGE 4
8ETH03, 8ETH03S, 8ETH03-1 Bulletin PD-20023 rev. C 09/01 10 Average Power Loss ( Watts ) Allowable Case Temperature (°C) 180 170 DC 160 150 Square wave (D = 0.50) Rated Vr applied 140 see note (3) RMS Limit 8 6 DC D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.20 D = 0.50 4 2 0 130 0 2 4 6 8 10 12 0 14 Average Forward Current - I F(AV) (A) 2 Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current 6 8 10 12 Fig.
PAGE 5
8ETH03, 8ETH03S, 8ETH03-1 Bulletin PD-20023 rev. C 09/01 Reverse Recovery Circuit VR = 200V 0.01 Ω L = 70µH D.U.T. di F /dt dif/dt ADJUST D IRFP250 G S Fig. 1 - Reverse Recovery Parameter Test Circuit 3 trr IF tb ta 0 2 Q rr I RRM 4 0.5 I RRM di(rec)M/dt 5 0.75 I RRM 1 di fF/dt /dt 1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3.
PAGE 6
8ETH03, 8ETH03S, 8ETH03-1 Bulletin PD-20023 rev. C 09/01 Outline Table 10.54 (0.41) 1.32 (0.05) MAX. 3.78 (0.15) 3.54 (0.14) 2.92 (0.11) 2.54 (0.10) TERM 2 15.24 (0.60) 14.84 (0.58) 1 1.22 (0.05) DIA. 2° 3 14.09 (0.55) 3.96 (0.16) 13.47 (0.53) 3.55 (0.14) Base Cathode 6.48 (0.25) 6.23 (0.24) 0.10 (0.004) 2.04 (0.080) MAX. 1.40 (0.05) 2.89 (0.11) 1.15 (0.04) 2.64 (0.10) 0.94 (0.04) 1 3 Cathode Anode 0.69 (0.03) 1 3 0.61 (0.02) MAX. 4.57 (0.18) 4.32 (0.17) 5.08 (0.20) REF.
PAGE 7
8ETH03, 8ETH03S, 8ETH03-1 Bulletin PD-20023 rev. C 09/01 Outline Table 2 1 N/C 3 Anode Conforms to JEDEC Outline TO-262 Dimensions in millimeters and (inches) Marking Information EXAMPLE: THIS IS A 8ETH03 LOT CODE 1789 ASSEMBLED ON WW 19, 1997 IN THE ASSEMBLY LINE "C" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE www.irf.
PAGE 8
ETH03, 8ETH03S, 8ETH03-1 Bulletin PD-20023 rev. C 09/01 Ordering Information Table Device Code 8 E T H 03 -1 1 2 3 4 5 6 1 - Current Rating (8 = 8A) 2 - E = Single Diode 3 - T = TO-220, D2Pak 4 - H = HyperFast Recovery 5 - Voltage Rating (03 = 300V) 6 - "-1" = TO-262 Option S = D2Pak None = TO-220AC Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level.